Networking Win Me and Win XP Pro

I have two computers one with Win ME and the Other with
Win XP Pro. I followed all the steps in the networking
wizard, and created a network setup disk in XP. I
installed the network setup disk into the Win me machine,
but i can't get the win me machine to see the XP machine.
I have both computers running through a Dlink hub, and
both accessing the internet through the hub. Does anyone
know how to get these two machines to like each other. Can
someone help me, please!

www.careyholzman.com/netfixes.htm

Carey

"TonyM" <(E-Mail Removed)> wrote in message
news:0a4501c3821c$4d0a6d50$(E-Mail Removed)...
> I have two computers one with Win ME and the Other with
> Win XP Pro. I followed all the steps in the networking
> wizard, and created a network setup disk in XP. I
> installed the network setup disk into the Win me machine,
> but i can't get the win me machine to see the XP machine.
> I have both computers running through a Dlink hub, and
> both accessing the internet through the hub. Does anyone
> know how to get these two machines to like each other. Can
> someone help me, please!

In article <0a4501c3821c$4d0a6d50$(E-Mail Removed)>, "TonyM"
<(E-Mail Removed)> wrote:
>I have two computers one with Win ME and the Other with
>Win XP Pro. I followed all the steps in the networking
>wizard, and created a network setup disk in XP. I
>installed the network setup disk into the Win me machine,
>but i can't get the win me machine to see the XP machine.
>I have both computers running through a Dlink hub, and
>both accessing the internet through the hub. Does anyone
>know how to get these two machines to like each other. Can
>someone help me, please!

The answer that follows applies to computers that connect to a cable
modem or DSL modem through a hub or switch. It doesn't apply if they
connect through a router.

Just to be sure, what's the model number of your Dlink hub? If it's
actually a hub, not a router, please keep reading.

Your network setup is described in the Windows XP Help and Support
program. Click Start | Help and Support, search for the topic
"Network configurations overview", and look at the section labeled
"Individual Internet connections".

The solution given there is to install the IPX/SPX protocol for file
sharing and to disable file sharing on TCP/IP. I've written a web
page showing how to do it:

Windows XP Network Protocols
http://www.practicallynetworked.com/..._protocols.htm

There are two reasons to use IPX/SPX instead of TCP/IP for file
sharing:

1. If your cable or DSL provider assigns IP addresses in different
subnets to your computers, it isn't possible for them to communicate
with each other using TCP/IP.

2. Since your computers connect directly to the Internet through the
cable or DSL modem, they receive public IP addresses that are
accessible by everyone on the Internet. Using TCP/IP for file sharing
could let other people access your shared files.

An alternative would be to remove the hub or switch, get a broadband
router, connect the cable modem to its WAN port, and connect the
computers to its LAN ports. In that case:

1. You'd only need to get one IP address from your cable modem
provider, which would save you money if your ISP charges a monthly fee
for more than one IP address.

2. The broadband router would assign private IP addresses to your
computers. Private IP addresses aren't accessible by other Internet
users, so your network would be safe.

3. You could use TCP/IP as the only network protocol, with no need for
IPX/SPX.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm