| Home | Register | Members | Search | Links |
 |
| Thread Tools | Display Modes |
|
Guest
Posts: n/a
|
|
|
|
||
|
|
| |
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
|
|
|
|
||
|
Guest
Posts: n/a
|
Wish I'd thought to ask that sooner
 You can add the IP addresses of the2 desktops to the trusted zone in Zone Alarm. -- "kingpin68" <(E-Mail Removed)> wrote in message news:710C27F1-437D-4742-BAE2-(E-Mail Removed)... > Using the IP nets the same results. > > Yes, I do have Zone Labs running on the laptop, shutting it down and I can > now view the other machines and map a printer. What on the firewall do I > need to remove, etc? > > "GTS" wrote: > >> If you try the same thing using the IP address instead of the computer >> name >> what happens? >> Also, is there any firewall running on the laptop? >> -- >> >> "kingpin68" <(E-Mail Removed)> wrote in message >> news:AF840F94-1B93-4A07-81C8-(E-Mail Removed)... >> >I receive the following: >> > >> > \\penguins1 >> > >> > The network path was not found. >> > >> > I receive that from the laptop to the two desktops and vice versa. >> > >> > "GTS" wrote: >> > >> >> The fact that you can ping them is good. re. the other item 0 >> >> >> >> Click Start then Run. In the Open box type \\netname That's 2 >> >> backslashes and the network name of the other computer. It will >> >> either >> >> open >> >> an explorer view of the shares on the computer or will report an >> >> error >> >> code >> >> which will be helpful. >> >> -- >> >> >> >> "kingpin68" <(E-Mail Removed)> wrote in message >> >> news:FFA93E6C-FE47-4BF4-9AD1-(E-Mail Removed)... >> >> > All three machines are in the same subnet and I can ping the >> >> > desktops >> >> > via >> >> > the >> >> > laptop. I'm not familiar with the command you suggested I try, >> >> > sorry. >> >> > >> >> > "GTS" wrote: >> >> > >> >> >> That should be OK if they're all in the same subnet. From the >> >> >> laptop >> >> >> can >> >> >> you ping the desktops? If so, can you view them if you run >> >> >> //desktopname? >> >> >> -- >> >> >> >> >> >> "kingpin68" <(E-Mail Removed)> wrote in message >> >> >> news:AE94A8E1-7415-422D-9149-(E-Mail Removed)... >> >> >> >I have the WRT54G set to 192.168.1.250, with DHCP swtiched off. >> >> >> > >> >> >> > I have all 3 devices set to static IP addresses, would this have >> >> >> > any >> >> >> > effect? >> >> >> > >> >> >> > "GTS" wrote: >> >> >> > >> >> >> >> This is the usual result when routers are chained this way. To >> >> >> >> use >> >> >> >> the >> >> >> >> wireless router as an Access Point you need to >> >> >> >> >> >> >> >> 1. Set the WRT54G to a static IP address on the same subnet but >> >> >> >> outside >> >> >> >> the >> >> >> >> DHCP range of the BEFSR41. >> >> >> >> 2. Disable DHCP on the WRT54G. >> >> >> >> 3. Do not use the uplink port of the WRT54G, i.e. connect the >> >> >> >> BEFSR41 >> >> >> >> and >> >> >> >> the 2 PCs to LAN ports only. >> >> >> >> >> >> >> >> See http://www.ezlan.net/router_AP.html for a little more detail >> >> >> >> if >> >> >> >> needed. >> >> >> >> -- >> >> >> >> >> >> >> >> "kingpin68" <(E-Mail Removed)> wrote in >> >> >> >> message >> >> >> >> news:F60C8065-E536-4DA7-81F3-(E-Mail Removed)... >> >> >> >> >I have 2 desktops networked/shared via a Linksys BEFSR41 >> >> >> >> >router. >> >> >> >> >I >> >> >> >> >also >> >> >> >> >have >> >> >> >> > an IBM Thinkpad on a WRT54G, which is 'piggy-backed' off the >> >> >> >> > BEFSR41, >> >> >> >> > basically acting as a wireless access point. From either of >> >> >> >> > the >> >> >> >> > desktops, >> >> >> >> > I >> >> >> >> > can see the laptop in the workgroup, however from the laptop I >> >> >> >> > can >> >> >> >> > see >> >> >> >> > no >> >> >> >> > machines in the workgroup. The laptop can hit the internet, >> >> >> >> > email, >> >> >> >> > etc. >> >> >> >> > but >> >> >> >> > cannot view the other machines to share files/printers. >> >> >> >> > >> >> >> >> > Thanks >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> |
|
|
|
|
|||
|
|
| |
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Networking Win and Mac machines over wireless | H Sridhar | Wireless Networks | 2 | 02-04-2007 07:01 PM |
| Missing machines within workgroup | David Hamer | Wireless Networks | 5 | 11-29-2005 04:06 PM |
| Problem networking 2 XP machines | Graeme | Home Networking | 2 | 08-23-2004 07:59 PM |
| Problem seeing all machines in workgroup | irrelevantelephant | Windows Networking | 10 | 08-08-2004 10:01 PM |
| Networking of an Me and 2 x XP machines... | Matt | Windows Networking | 1 | 10-15-2003 11:44 PM |
Linear Mode
