"זד" <@discussions.microsoft.com> wrote in message
news:0B88F0D4-CA58-4F88-A17D-(E-Mail Removed)...
> Hi,
> We have 10 pcs with XP pro Plus a Dell server with SBS 2003.
> Our Server Connects to the LAN through Dynamod 5 Port Switch into a RJ45
> socket in the wall and from there into 2 Edimax 8 Port Switches to all the
> pcs in our LAN.
> I know that it's a stupid way to configure one's LAN but it's going to
> change.
>
> Our LAN sometimes works on 10Mbps and sometimes crashes; to remedy this I
> have to "power cycle" the switches.
>
> My first question is - Which 20-24 Port Unmanaged Switch would you
> recommend
> that is stable and fast, with a budget of 200$ (if it's possible).
I use LinkSys unmanaged switches, but I'm sure switches from any recognised
name are probably just as good.
> Secondly - Are all Network peripherals requires "power cycles" every once
> in
> a while?
Network peripherals should not require cycling of the power. It sounds like
one of your switches is duff and needs to be replaced. You could try working
out which switch is at fault, but its probably not worth it since you are
going to replace them both anyway.
--
Brian Cryer
www.cryer.co.uk/brian