Network Logon Screen Not Available

I have an end user who we just re-imaged her system with
the factory software. However when I went to setup the
system to connect to the domain I fail to get any logon
dialog box. I've checked all the normal items. I'm setup
to connect using the microsoft client rather than the
windows logon client. I can ping the server by IP address
but cannot map a drive by IP address. I even tried
netbeui since the server had it installed an still do not
get a logon screen for the domain, cna't even browse the
network neighborhood. The server is setup for DHCP and is
supplying a DHCP address to the workstation, so I can get
to the net with the workstation but not the server.
Server is NT4 SP6

Any Ideas? This is a system that has had the restore CD
run, and is like a new system.

Thanks for your help in advance

Using REGEDIT, open up the following key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\
Network\Real Mode Net

and delete the value named "AutoLogon" if it exists.

Reboot the system and that should do it.

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"(E-Mail Removed)" <(E-Mail Removed)> wrote in message
news:1c9c01c4270c$3d88e8d0$(E-Mail Removed)...
> I have an end user who we just re-imaged her system with
> the factory software. However when I went to setup the
> system to connect to the domain I fail to get any logon
> dialog box. I've checked all the normal items. I'm setup
> to connect using the microsoft client rather than the
> windows logon client. I can ping the server by IP address
> but cannot map a drive by IP address. I even tried
> netbeui since the server had it installed an still do not
> get a logon screen for the domain, cna't even browse the
> network neighborhood. The server is setup for DHCP and is
> supplying a DHCP address to the workstation, so I can get
> to the net with the workstation but not the server.
> Server is NT4 SP6
>
> Any Ideas? This is a system that has had the restore CD
> run, and is like a new system.
>
> Thanks for your help in advance

I am having the same issues as mentioned above by romanb,
and the key you mentioned Richard does not exist as I only
have the TCP/IP protocol installed and the only service
running is Client for Microsoft Networks.

Could someone please help us out.

All explained here:
www.careyholzman.com/netfixes.htm

Carey

"Michael" <(E-Mail Removed)> wrote in message
news:524301c42cb0$0e2ddf10$(E-Mail Removed)...
> I am having the same issues as mentioned above by romanb,
> and the key you mentioned Richard does not exist as I only
> have the TCP/IP protocol installed and the only service
> running is Client for Microsoft Networks.
>
> Could someone please help us out.

>-----Original Message-----
>All explained here:
>www.careyholzman.com/netfixes.htm
>
>Carey
>
>"Michael" <(E-Mail Removed)> wrote in
message
>news:524301c42cb0$0e2ddf10$(E-Mail Removed)...
>> I am having the same issues as mentioned above by
romanb,
>> and the key you mentioned Richard does not exist as I
only
>> have the TCP/IP protocol installed and the only service
>> running is Client for Microsoft Networks.
>>
>> Could someone please help us out.
>
>
>.
>

>-----Original Message-----
>I am having the same issues as mentioned above by romanb,
>and the key you mentioned Richard does not exist as I
only
>have the TCP/IP protocol installed and the only service
>running is Client for Microsoft Networks.
>
>Could someone please help us out.
>.
>