Network Card

I'm trying to install a network card to my laptop with
W98SE. I was able to install it but there is not TCP/IP
protocol related to my adapter. I tried disabling all
other adapters and re installing the card but it did not
work. Any ideas.

RLeiva wrote:

> I'm trying to install a network card to my laptop with
> W98SE. I was able to install it but there is not TCP/IP
> protocol related to my adapter. I tried disabling all
> other adapters and re installing the card but it did not
> work. Any ideas.

It sounds like you installed the device driver, but not TCP/IP.

So go to My Computer -> Control Panel -> Networking and install
it. The big button that says "Add" will get you started.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net.

In article <d86101c43af9$c7bb38e0$(E-Mail Removed)>, "RLeiva"
<(E-Mail Removed)> wrote:
>I'm trying to install a network card to my laptop with
>W98SE. I was able to install it but there is not TCP/IP
>protocol related to my adapter. I tried disabling all
>other adapters and re installing the card but it did not
>work. Any ideas.

You might need to increase the maximum number of TCP/IP bindings.
Please see this Microsoft Knowledge Base article:

Unable to Bind Protocols to More Than 5 Network Adapters
http://support.microsoft.com/?id=217744

To search the Knowledge Base, go to this web page:

http://support.microsoft.com/default...;EN-US;KBHOWTO
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm