Netgear WGR614 --> was working, now I can't even get to the "192.168.0.1" page

I've had this router for a while and it was working fine. Then I had to change some settings to get
my ftp and MSN Messenger voice chat working. I changed the settings in UPnP, DMZ, port forwarding
and such. Then my MSN messenger was working, but not my ftp. So, I decided to change it back, and
now nothing is working. I can't even get to the router setup page (192.68.0.1), so I don't know
what to do. I cycled my modem and the WGR614 power, but that didn't help. I tried pressing the
reset button on the back of the WGR614, but that didn't seem to do anything (are the lights supposed
to do something when you hit the reset button? I held it for 10, 20 seconds but there was no
indication that anything happened). Anyway, I don't know what else to do, any help will be
appreciated of course.

THanks,
AC

You might try holding the reset button during power boot. That's how
my D-Link works.

HTH
Mike

On Sat, 20 Sep 2003 12:22:30 -0700, superboyAC <(E-Mail Removed)>
wrote:

>I've had this router for a while and it was working fine. Then I had to change some settings to get
>my ftp and MSN Messenger voice chat working. I changed the settings in UPnP, DMZ, port forwarding
>and such. Then my MSN messenger was working, but not my ftp. So, I decided to change it back, and
>now nothing is working. I can't even get to the router setup page (192.68.0.1), so I don't know
>what to do. I cycled my modem and the WGR614 power, but that didn't help. I tried pressing the
>reset button on the back of the WGR614, but that didn't seem to do anything (are the lights supposed
>to do something when you hit the reset button? I held it for 10, 20 seconds but there was no
>indication that anything happened). Anyway, I don't know what else to do, any help will be
>appreciated of course.
>
>THanks,
>AC