NETGEAR WGR614 v4

This router will not let email go out from any computer. Received email ok.
Using WinXp, Ms. Outlook 2000. If I bypass the router the cable modem
will send and receive email on both computers. Using the router, no
outgoing
mail.
Anyone help?
Thanks.
(E-Mail Removed)

BTY, this is a wireless router, but using it wired.

Thanks.


"HP" <(E-Mail Removed)> wrote in message
news:EsbQd.10197$(E-Mail Removed)...
> This router will not let email go out from any computer. Received email
ok.
> Using WinXp, Ms. Outlook 2000. If I bypass the router the cable modem
> will send and receive email on both computers. Using the router, no
> outgoing
> mail.
> Anyone help?
> Thanks.
> (E-Mail Removed)
>
>

HP wrote:
> BTY, this is a wireless router, but using it wired.
>
> Thanks.
>
>
> "HP" <(E-Mail Removed)> wrote in message
> news:EsbQd.10197$(E-Mail Removed)...
>
>>This router will not let email go out from any computer. Received email
>
> ok.
>
>>Using WinXp, Ms. Outlook 2000. If I bypass the router the cable modem
>>will send and receive email on both computers. Using the router, no
>>outgoing
>>mail.
>>Anyone help?
>>Thanks.
>>(E-Mail Removed)
>>
>>
>
>
>

Not that you care or that it can help, but it is probably a firmware
problem. I say this because I had a Belkin Wireless 802.11g and when
Belkin told me to install a newer firmware to see if it might fix a
problem I was having, it broke my email just exactly like yers. I could
not send mail, but receive was fine. So since they had no older firmware
to give me they had to send me a new router.

[posted and mailed]

"HP" <(E-Mail Removed)> wrote in
news:EsbQd.10197$(E-Mail Removed):

> This router will not let email go out from any computer. Received
> email ok. Using WinXp, Ms. Outlook 2000. If I bypass the router the
> cable modem will send and receive email on both computers. Using the
> router, no outgoing
> mail.
> Anyone help?
> Thanks.
> (E-Mail Removed)
>
>

Hi,
A common cause of this behavior is your MTU(MaxTransferUnit) is set to
large.

On your netgear admin page click on WAN Setup on that subpage set the MTU
Size to 1492.

Joe

Joseph T. Galietto wrote:
> [posted and mailed]
>
> "HP" <(E-Mail Removed)> wrote in
> news:EsbQd.10197$(E-Mail Removed):
>
>> This router will not let email go out from any computer. Received
>> email ok. Using WinXp, Ms. Outlook 2000. If I bypass the router
>> the cable modem will send and receive email on both computers.
>> Using the router, no outgoing
>> mail.
>> Anyone help?
>> Thanks.
>> (E-Mail Removed)
>>
>>
>
> Hi,
> A common cause of this behavior is your MTU(MaxTransferUnit) is set
> to large.
>
> On your netgear admin page click on WAN Setup on that subpage set
> the MTU Size to 1492.
>
> Joe

That is correct if you connect via PPoE but not for DHCP.

--

Travis in Shoreline Washington

"Joseph T. Galietto" <(E-Mail Removed)> wrote in message
news:Xns95FFEA60DBCF2jtg55verizonnet@130.81.64.196 ...
> [posted and mailed]
>
> "HP" <(E-Mail Removed)> wrote in
> news:EsbQd.10197$(E-Mail Removed):
>
>> This router will not let email go out from any computer. Received
>> email ok. Using WinXp, Ms. Outlook 2000. If I bypass the router the
>> cable modem will send and receive email on both computers. Using the
>> router, no outgoing
>> mail.
>> Anyone help?
>> Thanks.
>> (E-Mail Removed)
>>
>>
>
> Hi,
> A common cause of this behavior is your MTU(MaxTransferUnit) is set to
> large.
>
> On your netgear admin page click on WAN Setup on that subpage set the MTU
> Size to 1492.

I haven't applied this yet, but I plan to tommorow- I have a router that
has this exact problem
and thank you sir!