Netgear WGE111 will not work... help please...

I bought a Netgear WGE111 to use as an ethernet wifi adaptor for my
downstairs PC. I can't get it to work..

I have the following setup.
Surfboard Cable Modem, Netgear VOIP adaptor with DHCP switched on, Netgear
WGR614 Wifi router set with fixed IP of 192.168.61.52 and DHCP swithed
off...WEP64 enabled (i.e min encryption)

I can usually get most stuff to work but this WGE111 has me totally
defeated. I have tried...

with wep on and off (i.e turning the wep off on the router)
upgraded to firmware 14 and downgraded to firmware 12
set a fixed IP address on the PC to enable me to access the web interface
via 192.158.0.202 (the default IP addr) and setting up via web interface
I have tried setting up via the setup wizard (that iis easier said than done
it rarely detectd it)

all with no luck..... it's exasperating. I have found it all very fiddly and
am surprised I can't seem to find anyone else out there that has problems
with this unit.

Do you think it's faulty??

Any help would be great.

Patrick
UK

pgnl wrote:
> I bought a Netgear WGE111 to use as an ethernet wifi adaptor for my
> downstairs PC. I can't get it to work..
>
> I have the following setup.
> Surfboard Cable Modem, Netgear VOIP adaptor with DHCP switched on, Netgear
> WGR614 Wifi router set with fixed IP of 192.168.61.52 and DHCP swithed
> off...WEP64 enabled (i.e min encryption)
>
> I can usually get most stuff to work but this WGE111 has me totally
> defeated. I have tried...
>
> with wep on and off (i.e turning the wep off on the router)
> upgraded to firmware 14 and downgraded to firmware 12
> set a fixed IP address on the PC to enable me to access the web interface
> via 192.158.0.202 (the default IP addr) and setting up via web interface
> I have tried setting up via the setup wizard (that iis easier said than done
> it rarely detectd it)
>
> all with no luck..... it's exasperating. I have found it all very fiddly and
> am surprised I can't seem to find anyone else out there that has problems
> with this unit.
>
> Do you think it's faulty??
>
> Any help would be great.
>
> Patrick
> UK

On 24 Nov 2006 10:28:33 -0800, (E-Mail Removed) wrote in
<(E-Mail Removed) .com>:

>
>pgnl wrote:
>> I bought a Netgear WGE111 to use as an ethernet wifi adaptor for my
>> downstairs PC. I can't get it to work..
>>
>> I have the following setup.
>> Surfboard Cable Modem, Netgear VOIP adaptor with DHCP switched on, Netgear
>> WGR614 Wifi router set with fixed IP of 192.168.61.52

Why not use DHCP?

>and DHCP swithed
>> off...WEP64 enabled (i.e min encryption)

Turn off *all* security while troubleshooting.

>> I can usually get most stuff to work but this WGE111 has me totally
>> defeated. I have tried...
>>
>> with wep on and off (i.e turning the wep off on the router)
>> upgraded to firmware 14 and downgraded to firmware 12
>> set a fixed IP address on the PC to enable me to access the web interface
>> via 192.158.0.202 (the default IP addr) and setting up via web interface

158 could be an issue -- is that a typo?

>> I have tried setting up via the setup wizard (that iis easier said than done
>> it rarely detectd it)
>>
>> all with no luck..... it's exasperating. I have found it all very fiddly and
>> am surprised I can't seem to find anyone else out there that has problems
>> with this unit.
>>
>> Do you think it's faulty??

Have you reset the WGE11 to hardware defaults?
Is it connecting? Getting a DHCP address?
What netmasks are you using?

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>