Netgear ME 102 pass word needed

Anybody know the pass word for Netgear ME 102 Access Point Management
Utility?

thanks
Jesper

Jesper Olsen wrote:

>Anybody know the pass word for Netgear ME 102 Access Point Management
>Utility?
>
>thanks
>Jesper
>
>
>
>
I'm using an ME102, but it has been several years since I set it up. I
believe that it came with a blank password by default. I'd try a hard
reset of the device.

> >Anybody know the pass word for Netgear ME 102 Access Point Management
> >Utility?
> >
> >thanks
> >Jesper
> >
> >
> >
> >
> I'm using an ME102, but it has been several years since I set it up. I
> believe that it came with a blank password by default. I'd try a hard
> reset of the device.

how do I perform a hard reset?

/Jesper

Jesper Olsen wrote:

>>>Anybody know the pass word for Netgear ME 102 Access Point Management
>>>Utility?
>>>
>>>thanks
>>>Jesper
>>>
>>>
>>>
>>>
>>>
>>>
>>I'm using an ME102, but it has been several years since I set it up. I
>>believe that it came with a blank password by default. I'd try a hard
>>reset of the device.
>>
>>
>
>how do I perform a hard reset?
>
>/Jesper
>
>
>
>
Again, I'm not really sure. Generally, devices are reset to factory
default by holding in the reset button for approximately 15 seconds
while applying power to the unit. That is, unplug the unit, press in the
reset button, apply power an hold in the reset button for approximately
15 seconds.

I don't really know if that will work for this particular unit.

> >>>Anybody know the pass word for Netgear ME 102 Access Point Management
> >>>Utility?
> >>>
> >>>thanks
> >>>Jesper

> >>I'm using an ME102, but it has been several years since I set it up. I
> >>believe that it came with a blank password by default. I'd try a hard
> >>reset of the device.
> >how do I perform a hard reset?
> >/Jesper

> Again, I'm not really sure. Generally, devices are reset to factory
> default by holding in the reset button for approximately 15 seconds
> while applying power to the unit. That is, unplug the unit, press in the
> reset button, apply power an hold in the reset button for approximately
> 15 seconds.
>
> I don't really know if that will work for this particular unit.

The problem is that I can't find a reset button on my device??!! So?

/Jesper

Jesper Olsen wrote:

>>>>>Anybody know the pass word for Netgear ME 102 Access Point Management
>>>>>Utility?
>>>>>
>>>>>thanks
>>>>>Jesper
>>>>>
>>>>>
>
>
>
>>>>I'm using an ME102, but it has been several years since I set it up. I
>>>>believe that it came with a blank password by default. I'd try a hard
>>>>reset of the device.
>>>>
>>>>
>>>how do I perform a hard reset?
>>>/Jesper
>>>
>>>
>
>
>
>>Again, I'm not really sure. Generally, devices are reset to factory
>>default by holding in the reset button for approximately 15 seconds
>>while applying power to the unit. That is, unplug the unit, press in the
>>reset button, apply power an hold in the reset button for approximately
>>15 seconds.
>>
>>I don't really know if that will work for this particular unit.
>>
>>
>
>The problem is that I can't find a reset button on my device??!! So?
>
>/Jesper
>
>
>
>
Mine is mounted high in my stairwell and is not easy to access, but I
can't see a reset button on it.

So -- chunk the unit?

Jerry Park wrote:

> Jesper Olsen wrote:
>
>>>>>> Anybody know the pass word for Netgear ME 102 Access Point
>>>>>> Management
>>>>>> Utility?
>>>>>>
>>>>>> thanks
>>>>>> Jesper
>>>>>>
>>>>>
>>
>>
>>
>>>>> I'm using an ME102, but it has been several years since I set it
>>>>> up. I
>>>>> believe that it came with a blank password by default. I'd try a hard
>>>>> reset of the device.
>>>>>
>>>>
>>>> how do I perform a hard reset?
>>>> /Jesper
>>>>
>>>
>>
>>
>>
>>> Again, I'm not really sure. Generally, devices are reset to factory
>>> default by holding in the reset button for approximately 15 seconds
>>> while applying power to the unit. That is, unplug the unit, press in
>>> the
>>> reset button, apply power an hold in the reset button for approximately
>>> 15 seconds.
>>>
>>> I don't really know if that will work for this particular unit.
>>>
>>
>>
>> The problem is that I can't find a reset button on my device??!! So?
>>
>> /Jesper
>>
>>
>>
>>
> Mine is mounted high in my stairwell and is not easy to access, but I
> can't see a reset button on it.
>
> So -- chunk the unit?

Are you accessing the unit with the SNMP manager or the USB manager?

I know the SNMP manager requires the password but I'm not sure the USB
manager does. It might be the solution.

(I'd try that, but it would be way too much trouble to dismount my unit
and access it with a USB connection).

On Wed, 23 Mar 2005 17:26:11 -0600, Jerry Park wrote:

> Jesper Olsen wrote:

> Mine is mounted high in my stairwell and is not easy to access, but I
> can't see a reset button on it.
>
> So -- chunk the unit?

look for a user manual online?

http://kbserver.netgear.com/products/me102.asp

Are you accessing the unit with the SNMP manager or the USB manager?
>
> I know the SNMP manager requires the password but I'm not sure the USB
> manager does. It might be the solution.
>
> (I'd try that, but it would be way too much trouble to dismount my unit
> and access it with a USB connection).

I'm trying to access it with the SNMP mangager and here I need the pass
word. I haven't tried with the the USB manager, but eventually I will.

/Jesper

>
> > Jesper Olsen wrote:
>
> > Mine is mounted high in my stairwell and is not easy to access, but I
> > can't see a reset button on it.
> >
> > So -- chunk the unit?
>
> look for a user manual online?
>
> http://kbserver.netgear.com/products/me102.asp

I have been looking in the online manual in the first time, but couldn't
find a pass word there.

/Jesper