Netgear FWAG114 to Linksys WRV54G issues

Hopefully someone can help with this.

Currently trying to setup VPN tunnel between Linksys WRV54G and Netgear
FWAG114 routers. Currently I have them "Connected" but I am unable to
"see" the other network. I've disabled local firewalls (for a short
time for testing) and still nothing. Simple pings don't even work.

Below is an example of the setup we are using:


Linksys
------------
Local Secure Group
IP: 192.168.1.0
Mask: 255.255.255.0

Remote Secure Group
IP: 192.168.4.0
Mask: 255.255.255.0

Remote Secure Gateway
<IP address of other network>

Key Management
Exchange Method: Main
Encryption Algorithm: DES
Encryption Key: 3139343730373839 (HEX)
Authenticaion Algorithm: SHA1
Authentication Key: 3132333435363738393030393837363534333231 (HEX)
Inbound SPI: 11111
Outbound SPI: 1111

Netgear FWAG114
---------------------------
Manual Policy
Remote VPN Endpoint
Address Type: Fully Qualified Address Name

Traffic Selector
Local IP
Start IP: 192.168.4.0
Mask: 255.255.255.0
Remote IP
Start IP: 192.168.1.0
Mask: 255.255.255.0

ESP Configuration
SPI - Incoming: 11111
SPI - Outgoing: 1111
Encryption Type: DES
Encryption Key IN: 19470789 (ACSII/chars)
Encryption Key OUT: 19470789 (ASCII/chars)
Authentication Type: SHA1
Authentication Key IN: 12345678900987654321 (ASCII/chars)
Authentication Key OUT: 12345678900987654321 (ASCII/chars)


To me, it appears that everything is setup to handle the packets
correctly, but I'm obviously missing something. Any help would be
greatly appreciated.

Thanks,
erh

Scratch the question. Issue had to do with having the machine on the
DMZ. As soon as I took the machine off there everything worked great.
Live and learn I guess.

erh