Netgear DG834G error statistics?

Hi,

Is there any way to get the Netgear DG834G to give you statistics for
errors on the ADSL line? The closest I can get is doing an ifconfig in
debug mode, which tells me there are no errors, but I'm not sure whether
to trust it.

Thanks
- Ian

--
Ian Chard, Unix & Network Administrator | E: (E-Mail Removed)
Systems and Electronic Resources Service | T: 80587 / (01865) 280587
Oxford University Library Services | F: (01865) 242287

"Ian Chard" <(E-Mail Removed)> wrote in message
news:e12pcc$180$(E-Mail Removed)...
| Hi,
|
| Is there any way to get the Netgear DG834G to give you statistics for
| errors on the ADSL line? The closest I can get is doing an ifconfig in
| debug mode, which tells me there are no errors, but I'm not sure whether
| to trust it.

On mine you can't even get line loss and DB figures. Piss Poor in my view.

"Sucuba Dude" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> "Ian Chard" <(E-Mail Removed)> wrote in message
> news:e12pcc$180$(E-Mail Removed)...
> | Hi,
> |
> | Is there any way to get the Netgear DG834G to give you statistics for
> | errors on the ADSL line? The closest I can get is doing an ifconfig in
> | debug mode, which tells me there are no errors, but I'm not sure whether
> | to trust it.
>
> On mine you can't even get line loss and DB figures. Piss Poor in my view.
>
>

Are you sure about this. I have a DG834 and at the bottom of the Router
Status page is the Show Statistics link with all that info.

--
Paul Woodsford
Remove NOSPAM to reply.

Sucuba Dude <(E-Mail Removed)> wrote:
: On mine you can't even get line loss and DB figures. Piss Poor in my view.

You must be many generations out on the firmware then! It has done that for
years.

In article <(E-Mail Removed)>, (E-Mail Removed)
(Sucuba Dude) wrote:

> On mine you can't even get line loss and DB figures. Piss Poor in my
> view.
>

Make sure you have the latest firmware. Version 3 out now is a vast
improvement.


Leslie
www.icukhosting.co.uk

"www.icuknet.co.uk" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed). uk...
| In article <(E-Mail Removed)>, (E-Mail Removed)
| (Sucuba Dude) wrote:
|
| > On mine you can't even get line loss and DB figures. Piss Poor in my
| > view.
| >
|
| Make sure you have the latest firmware. Version 3 out now is a vast
| improvement.

Last time I updated the firmware on it it worked intermittently for about a
month and then died.
All attempts to revive it failed and back it went. I am in the position where I
have the netgear on on line and a Linksys WAG354G on the other.
Guess which on causes me agrovation and which one is solid as a rock and has not
even been rebooted in months. Here is a BIG clue, It's NOT the Netgear.....

Sucuba Dude wrote:
> Last time I updated the firmware on it it worked intermittently for about a
> month and then died.
> All attempts to revive it failed and back it went. I am in the position where I
> have the netgear on on line and a Linksys WAG354G on the other.
> Guess which on causes me agrovation and which one is solid as a rock and has not
> even been rebooted in months. Here is a BIG clue, It's NOT the Netgear.....

I think you've been very unlucky. I have a DG834G at home and two at
remote sites at work, and none of them have ever given me any trouble.
I've even updated the firmware remotely (not recommended, but I'm too
lazy to go out and do it locally!), with no problems at all.

The only reservation I have, as I've said, is that you can't get error
statistics out of the thing.

- Ian

--
Ian Chard, Unix & Network Administrator | E: (E-Mail Removed)
Systems and Electronic Resources Service | T: 80587 / (01865) 280587
Oxford University Library Services | F: (01865) 242287

Ian Chard wrote in message
e16181$3eu$(E-Mail Removed):

> Sucuba Dude wrote:
>> Last time I updated the firmware on it it worked intermittently for
>> about a month and then died.
>> All attempts to revive it failed and back it went. I am in the
>> position where I have the netgear on on line and a Linksys WAG354G
>> on the other.
>> Guess which on causes me agrovation and which one is solid as a rock
>> and has not even been rebooted in months. Here is a BIG clue, It's
>> NOT the Netgear.....
>
> I think you've been very unlucky. I have a DG834G at home and two at
> remote sites at work, and none of them have ever given me any trouble.

Agreed. I've got a DG834GT (108 Mbps version of DG834G) and I've never had
to reboot it. I've occasionally disconnected it when testing it on another
person's line to identify whether they've got a duff line or a duff router,
but apart from that it's up 24/7. It's currently been up for 1379 hours
(WAN/Ethernet/Wireless).

I've installed about 30 DG834Gs over the past year. I've only had problems
with two: one kept dropping the connection exactly 40 seconds after
authenticating, then reconnecting, authenticating and (40 seconds later)
dropping out - this was cured by upgrading to the V3 firmware; the other
router occasionally locked up and displayed no lights, which even a brief
power off/on didn't cure, although leaving the power off for about 10
minutes did - this was duff hardware (as diagnosed by Netgear when the
customer returned it under warranty).

Nowadays I upgrade the firmware on every DG834 that I install as a matter of
course to avoid the first problem. The second one was just duff hardware.

Of the three routers that I typically work with (Netgear DG834G/GT, Linksys
WAG54G and Dlink G604), the user interface on the Netgear is very
straightforward and the one on the Dlink always seems counter-intuitive;
several times I've had a Dlink revert to old settings after making a config
change despite saving the settings and rebooting the router.

The worst router I've ever encountered was a BT one (BT1800 or some such
model number) that a customer was supplied with when he ordered BT
broadband; the instructions told you to use a poxy Windows app to set it up,
rather than using a web interface, and the Windows app didn't work. I knew
to try browsing to the router's gateway address to find the web interface,
but many people wouldn't have known to try that. Having configured it, its
DHCP server was very unreliable - often PCs that were connected by wireless
failed to get an IP address, so I had to configure them all with static IPs.
Connections kept dropping out: typically a PC would show excellent signal
strength but nothing was pingable. After I'd spent several hours (spread
over a couple of weeks) trying to sort out the problem for the customer, I
advised him to cut his losses and get a Netgear. This has worked flawlessly
ever since.

Martin Underwood wrote:
> Ian Chard wrote in message
> e16181$3eu$(E-Mail Removed):
>
>
>>Sucuba Dude wrote:
>>
>>>Last time I updated the firmware on it it worked intermittently for
>>>about a month and then died.
>>>All attempts to revive it failed and back it went. I am in the
>>>position where I have the netgear on on line and a Linksys WAG354G
>>>on the other.
>>>Guess which on causes me agrovation and which one is solid as a rock
>>>and has not even been rebooted in months. Here is a BIG clue, It's
>>>NOT the Netgear.....
>>
>>I think you've been very unlucky. I have a DG834G at home and two at
>>remote sites at work, and none of them have ever given me any trouble.
>
>
> Agreed. I've got a DG834GT (108 Mbps version of DG834G) and I've never had
> to reboot it. I've occasionally disconnected it when testing it on another
> person's line to identify whether they've got a duff line or a duff router,
> but apart from that it's up 24/7. It's currently been up for 1379 hours
> (WAN/Ethernet/Wireless).
>
> I've installed about 30 DG834Gs over the past year. I've only had problems
> with two: one kept dropping the connection exactly 40 seconds after
> authenticating, then reconnecting, authenticating and (40 seconds later)
> dropping out - this was cured by upgrading to the V3 firmware; the other
> router occasionally locked up and displayed no lights, which even a brief
> power off/on didn't cure, although leaving the power off for about 10
> minutes did - this was duff hardware (as diagnosed by Netgear when the
> customer returned it under warranty).
>
> Nowadays I upgrade the firmware on every DG834 that I install as a matter of
> course to avoid the first problem. The second one was just duff hardware.
>
> Of the three routers that I typically work with (Netgear DG834G/GT, Linksys
> WAG54G and Dlink G604), the user interface on the Netgear is very
> straightforward and the one on the Dlink always seems counter-intuitive;
> several times I've had a Dlink revert to old settings after making a config
> change despite saving the settings and rebooting the router.
>
> The worst router I've ever encountered was a BT one (BT1800 or some such
> model number) that a customer was supplied with when he ordered BT
> broadband; the instructions told you to use a poxy Windows app to set it up,
> rather than using a web interface, and the Windows app didn't work. I knew
> to try browsing to the router's gateway address to find the web interface,
> but many people wouldn't have known to try that. Having configured it, its
> DHCP server was very unreliable - often PCs that were connected by wireless
> failed to get an IP address, so I had to configure them all with static IPs.
> Connections kept dropping out: typically a PC would show excellent signal
> strength but nothing was pingable. After I'd spent several hours (spread
> over a couple of weeks) trying to sort out the problem for the customer, I
> advised him to cut his losses and get a Netgear. This has worked flawlessly
> ever since.
>
>

I got to agree with SD. I have a DG834G and the build quality and
reliability are toilet. P2P on it really seems to stretch it. It's
really of the toy variety IMHO, but we are all different I guess.

Ian Chard Wrote:
>
> Is there any way to get the Netgear DG834G to give you statistics for
> errors on the ADSL line?

On the DG834G only: cat /proc/avalanche/avsar_modem_stats
On the DG834GT/GTB: /usr/sbin/adslctl info --stats

Perhaps that helps. (Thanks to the Bulldog User Group

--
alu