Networking Forums

Networking Forums > Computer Networking > Windows Networking > Net use connection to an EMC Cellera NAS

Reply
Thread Tools Display Modes

Net use connection to an EMC Cellera NAS

 
 
Mordred201
Guest
Posts: n/a

 
      12-14-2005, 09:44 PM
I have one server that will not allow me to map a drive to an EMC Cellera
NAS. However, the server will make connections to other windows/Unix file
servers.

the error i get is system error 67 if I use net use. it also does not matter
if i use netbios name, fqdn, or ip address, they all return the same.

I also cannot make a mapped drive through My Computer.

when I do a netstat i see alot of microsoft-ds time_waits to the Cellera.

the server is a Win 2k3 non SP box using nic teaming. Other servers
configured nearly exactly the same have no problem. we use a master image to
apply subsequent builds onto all of our servers.

I haven't rebooted the box yet, since it is in production, and managment
frowns on reboots.

Any Advice would be greatly appreciated
 
Reply With Quote
 
 
 
 
Mordred201
Guest
Posts: n/a

 
      12-15-2005, 06:33 PM
Want to update the discussion group on this. I rebooted the server and this
had no effect on the issue.

while looking at the local security policy, I noticed that the Network
Security: Minimum session security for NTLM SSP for both clients and servers
had all internal entries checked. I verified that a few of my other servers
did not have this checked and unchecked them. After the reboot, I was able to
successfully connect to the Cellera NAS. As I am inheriting the servers, I'm
not sure when or why these were selected.

Just wanted to provide and update, since I've seen others that have been
experiencing the same issue.

"Mordred201" wrote:

> I have one server that will not allow me to map a drive to an EMC Cellera
> NAS. However, the server will make connections to other windows/Unix file
> servers.
>
> the error i get is system error 67 if I use net use. it also does not matter
> if i use netbios name, fqdn, or ip address, they all return the same.
>
> I also cannot make a mapped drive through My Computer.
>
> when I do a netstat i see alot of microsoft-ds time_waits to the Cellera.
>
> the server is a Win 2k3 non SP box using nic teaming. Other servers
> configured nearly exactly the same have no problem. we use a master image to
> apply subsequent builds onto all of our servers.
>
> I haven't rebooted the box yet, since it is in production, and managment
> frowns on reboots.
>
> Any Advice would be greatly appreciated

 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reject connection by machine name, accept connection by DNS alias Scott Bass Windows Networking 3 11-20-2008 04:11 PM
Virtual wired connection is 2x fast than wireless connection Salvador - Galicia(España) Wireless Networks 0 08-06-2007 06:10 AM
Belkin F5D 7630-4A keeps dropping connection BT broadband connection Chris MacNeil Wireless Internet 3 09-07-2004 02:03 PM
Belkin F5D 7630-4A keeps dropping connection BT broadband connection Chris MacNeil Home Networking 3 09-07-2004 02:03 PM
Re: how to enable Internet Connection Sharing (ICS) to share the dial-up connection Steve Winograd [MVP] Windows Networking 0 08-08-2003 07:27 AM



1 2 3 4 5 6 7 8 9 10 11