Need source for N-type connector

Building some antennas for a Maryland State Park, but I can't seem to
find a source for a female N-type panel-mount connector. Everybody
sells the model that has a 1 inch square mounting flange. I need the
one with the threaded body and a large thin nut.

Does anyone have a link to an electronics supplier that sells the
model for which I'm looking?

sky_diver_@excite.com wrote:
> Building some antennas for a Maryland State Park, but I can't seem to
> find a source for a female N-type panel-mount connector. Everybody
> sells the model that has a 1 inch square mounting flange. I need the
> one with the threaded body and a large thin nut.

www.fab-corp.com lists a few different N-Connectors. There is a four hole,
a two hole, and a "front mount" which seems to be what you want.
http://www.fab-corp.com/product.php?productid=2183


--
Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5

On May 14, 3:20 pm, d...@80.usenet.us.com wrote:
> sky_div...@excite.com wrote:
> > Building some antennas for a Maryland State Park, but I can't seem to
> > find a source for a female N-type panel-mount connector. Everybody
> > sells the model that has a 1 inch square mounting flange. I need the
> > one with the threaded body and a large thin nut.
>
> www.fab-corp.comlists a few different N-Connectors. There is a four hole,
> a two hole, and a "front mount" which seems to be what you want.http://www.fab-corp.com/product.php?productid=2183
>
> --
> Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5

PERFECT!
Thanks you so much Clarence.

sky_diver_@excite.com wrote in
news:(E-Mail Removed) ups.com:

> On May 14, 3:20 pm, d...@80.usenet.us.com wrote:
>> sky_div...@excite.com wrote:
>> > Building some antennas for a Maryland State Park, but I can't seem
>> > to find a source for a female N-type panel-mount connector.
>> > Everybody sells the model that has a 1 inch square mounting flange.
>> > I need the one with the threaded body and a large thin nut.
>>
>> www.fab-corp.comlists a few different N-Connectors. There is a four
>> hole, a two hole, and a "front mount" which seems to be what you
>> want.http://www.fab-corp.com/product.php?productid=2183
>>
>> --
>> Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5
>
> PERFECT!
> Thanks you so much Clarence.
>

Are you sure THAT is the one you are looking for ? I've used a LOT of
different 'N' connectors in the past 30 years, but I've never seen nor
used one as ugly as that one. The coax braid is supposed to be soldered
to the tab and the center conductor to the pin.

Digikey has *almost* any connector you could want. Figure 15 on this
catalog page:

http://dkc3.digikey.com/PDF/T072/0377.pdf

is something I'd use way before the other one, even at 2x the price.