Need some help quickly Please(Crossposted)

Crossposted on account of a quick feedback.I have a morning deadline ..Thank you

After installing SP1 my clients system got into a continuous loop at boot up. It gets to the Win2003 screen and then back and starts again. I am able to get into safe mode. I do not want to remove SP1 to get to boot up because I would like to find the answer to this issue. I have another 6 systems to put up and I need to have the answer just in case I run in to the same on the other ones.

--
Peter
Please post answers in newsgroup for the benefit of others.
Email is disabled.

I would check hardware first.
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"pdf" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
Crossposted on account of a quick feedback.I have a morning deadline ..Thank you

After installing SP1 my clients system got into a continuous loop at boot up. It gets to the Win2003 screen and then back and starts again. I am able to get into safe mode. I do not want to remove SP1 to get to boot up because I would like to find the answer to this issue. I have another 6 systems to put up and I need to have the answer just in case I run in to the same on the other ones.

--
Peter
Please post answers in newsgroup for the benefit of others.
Email is disabled.

Thanks Robert. Spent about 3 hrs to find the problem. It was his install of the
Intell graphics driver that was not meant for his system.Some how SP1 brought out
the issue.
Thank you for answering me and I also feel the same way as you as you see from my
Sig

--
Peter

Please Reply to Newsgroup for the benefit of others
Email is Disabled


"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
I would check hardware first.
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS
newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"pdf" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Crossposted on account of a quick feedback.I have a morning deadline .Thank you

After installing SP1 my clients system got into a continuous loop at boot up. It
gets to the Win2003 screen and then back and starts again. I am able to get into
safe mode. I do not want to remove SP1 to get to boot up because I would like to
find the answer to this issue. I have another 6 systems to put up and I need to have
the answer just in case I run in to the same on the other ones.

--
Peter
Please post answers in newsgroup for the benefit of others.
Email is disabled.

Peter,

Thank you for the feedback. We need that.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"Peter Foldes" <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
Thanks Robert. Spent about 3 hrs to find the problem. It was his install of the
Intell graphics driver that was not meant for his system.Some how SP1 brought out
the issue.
Thank you for answering me and I also feel the same way as you as you see from my
Sig

--
Peter

Please Reply to Newsgroup for the benefit of others
Email is Disabled


"Robert L [MS-MVP]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
I would check hardware first.
For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS
newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"pdf" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Crossposted on account of a quick feedback.I have a morning deadline ..Thank you

After installing SP1 my clients system got into a continuous loop at boot up. It
gets to the Win2003 screen and then back and starts again. I am able to get into
safe mode. I do not want to remove SP1 to get to boot up because I would like to
find the answer to this issue. I have another 6 systems to put up and I need to have
the answer just in case I run in to the same on the other ones.

--
Peter
Please post answers in newsgroup for the benefit of others.
Email is disabled.