tonita wrote:
> It is a Linksys BEFW11S4 ver 4.
That is an 802.11b router. I have that make and model.
If you reset the router by unplugging it pressing the reset button and plugging
the router back in while HOLDING THE RESET BUTTON FOR AT LEAST 30 SEC, you will
reset it. Use an RJ45 cable between the WAN port and the modem.
Once it is reset, wireless encryption will be off, it will have gotten a DHCP
address from your modem, the broadcast ssid will be 'linksys', and its
configuration interface will be at 192.168.1.1.
Set your browser's address line to
http://192.168.1.1 and you should see a login
request. Leave the user name as blank - the password will be 'admin' (without
the ' of course). At this point, you should change the password, but first play
around with the built-in web site. Other things you should change are the essid
and you should use WPA encryption with a strong password, but get used to the
configuration pages first.
Larry