NAT/Firewall

Hi there!

I've got a DynDNS account, a Zyxel Prestige HW-660 router, and want
to allow ssh access from the internet to a Mac OS X box behind this
router, on standard port 22. So I turned on NAT SUA with port 22
forwarding to my local address. It works, so far so good, but only
with the firewall disabled.

The firewall is set up to "nothing in, everything out" per default. I
added a rule to allow port 22 udp/tcp traffic from any address (WAN)
to any address (LAN). With this setup, I cannot connect.

What am I missing here?! Any help would be greatly appreciated.

-Andre

Good Day Andre:
I'm not that great with this sort of suff, but the big question that came to
my mind was: "did you tell the firewall that the gaming servers IP address
is a trusted site?"
just a thought...
Good Luck
Rich

"Andre Berger" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi there!
>
> I've got a DynDNS account, a Zyxel Prestige HW-660 router, and want
> to allow ssh access from the internet to a Mac OS X box behind this
> router, on standard port 22. So I turned on NAT SUA with port 22
> forwarding to my local address. It works, so far so good, but only
> with the firewall disabled.
>
> The firewall is set up to "nothing in, everything out" per default. I
> added a rule to allow port 22 udp/tcp traffic from any address (WAN)
> to any address (LAN). With this setup, I cannot connect.
>
> What am I missing here?! Any help would be greatly appreciated.
>
> -Andre