In article <305301c37552$890aa490$(E-Mail Removed)>, "edro"
<(E-Mail Removed)> wrote:
>i recently upgraded to xp on my 2nd machine and after i
>ran the home networking wizard on the xp i have access to
>the xp machine from my millenium based machine but i
>cannot locate the me pc from the xp machine. this is very
>important since i need to transfer some large files to the
>xp machine. i've tried running the networking wizard on
>both machines several times to no avail. both pc's connect
>to the internet via d-link router. note when both machines
>were millenium i had no problems setting up home network
>in this fashion. please help thanks.
1. Permanently disable XP's built-in Internet Connection Firewall on
local area network connections -- it's for use only on a direct modem
connection to the Internet. Disable and un-install all other firewall
programs on both computers while troubleshooting. Details here:
Windows XP Internet Connection Firewall
http://www.practicallynetworked.com/...c_firewall.htm
2. Use only one protocol for File and Printer Sharing. If the network
needs more than one protocol, unbind File and Printer Sharing from all
but one of them. Details here:
Windows XP Network Protocols
http://www.practicallynetworked.com/..._protocols.htm
3. Make sure that NetBIOS over TCP/IP is enabled on all computers.
Details here:
Enable NetBIOS Over TCP/IP (NetBT)
http://www.practicallynetworked.com/...hoot/netbt.htm
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm