my us robotics wireless network

Hi there, please help.

I have a ADSL/wireless router USR9106 which is capable of bridging to other
access points.

I have a US robotics 8054 access point/router. THis device has 3 mac
address's, what one do i use to put into the usr9106? WAN / LAN / Wireless

Is that all i need to do, put in the mac address in the main usr9106, or
will i need to do other stuff? Disabling DHCP for instance? if so, what
device do i disable it on?

Stuart

In article <MM-(E-Mail Removed)>, Stuart Turrell says...
> Hi there, please help.
>
> I have a ADSL/wireless router USR9106 which is capable of bridging to other
> access points.
>
> I have a US robotics 8054 access point/router. THis device has 3 mac
> address's, what one do i use to put into the usr9106? WAN / LAN / Wireless
>
> Is that all i need to do, put in the mac address in the main usr9106, or
> will i need to do other stuff? Disabling DHCP for instance? if so, what
> device do i disable it on?
>
If you're bridging using the Wireless then its the Wireless MAC you
need. You'll need to disable DHCP on the Access point.


--
Conor

An imperfect plan executed violently is far superior to a perfect plan.
-- George Patton