Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > my router power light wont work! after firmware upgrade! restore dont work!

Reply
Thread Tools Display Modes

my router power light wont work! after firmware upgrade! restore dont work!

 
 
Chriz Mac
Guest
Posts: n/a

 
      01-20-2005, 08:27 PM
ok... updates were available so i clicked on the toolbar
icon and accepted then installed for my base router mn-
700 which i have my xbox and my computer installed. After
i went through installation it said something was wrong
with the installation and i cancelled out. And then my
power light turned solid orange... then off! I simply
unplugged the unit of its power for 20 seconds and
plugged it back in and still no power light! I then try
to unplug and plug back in and hold the restore button
for 2 solid minutes.. and still no power light or
blinking or anything as if its dead! I have lights
indicating each ethernet cable plugged into each
jack/port. But no power. Also: The modem light linking to
my cable modem is blinking. Thats all i get. And i went
to update it once more and after the wizard does
detection nothing came up but the sofware on my computer.
Im stumped. help!!!!!
 
Reply With Quote
 
 
 
 
Lee Patton
Guest
Posts: n/a

 
      01-23-2005, 02:42 AM
I did excatly the same thing today with the same result!!
The power light will not turn from Orange to Green after
attempted install of update.
>-----Original Message-----
>ok... updates were available so i clicked on the toolbar
>icon and accepted then installed for my base router mn-
>700 which i have my xbox and my computer installed.

After
>i went through installation it said something was wrong
>with the installation and i cancelled out. And then my
>power light turned solid orange... then off! I simply
>unplugged the unit of its power for 20 seconds and
>plugged it back in and still no power light! I then try
>to unplug and plug back in and hold the restore button
>for 2 solid minutes.. and still no power light or
>blinking or anything as if its dead! I have lights
>indicating each ethernet cable plugged into each
>jack/port. But no power. Also: The modem light linking

to
>my cable modem is blinking. Thats all i get. And i went
>to update it once more and after the wizard does
>detection nothing came up but the sofware on my

computer.
>Im stumped. help!!!!!
>.
>

 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
WMI corrupted and Restore does not work Sean 3DD Wireless Networks 3 02-01-2006 07:22 PM
dont have permission for work group Broadband Hardware 2 02-07-2005 05:39 AM
Linksys router won't work after power loss DesignGuy Wireless Internet 2 11-19-2004 04:00 AM
USR Router Firmware update - FTP won't work.... Johnathon Aaron Steel Wireless Internet 1 10-30-2004 08:35 PM
MN-730 Power Light wont come on after reformat Matt Broadband Hardware 0 10-28-2004 10:37 PM



1 2 3 4 5 6 7 8 9 10 11