On Wed, 18 Jul 2007 14:11:36 -0400, "NotMe" <(E-Mail Removed)> wrote:
>My new WHR-HP-G54s have burned in for ~ 2 weeks and seem to be working
>without problems.
Our eternal flame at the temple only burned for 8 days on Hannukah.
What's your secret?
>I've been all over the DD-WRT and wiki site trying to figure out how to do
>the deed of safely installing the correct DD-WRT software in the first of
>these with out building a yellow brick road.
Bah. It's very easy, but you gotta have rhythm. The only cerimony
that works the first time is TFTP. Here are the exact instructions
for doing it under Windoze. Read carefully:
<http://www.dd-wrt.com/wiki/index.php/Installation#TFTP_Flashing_Buffalo_Routers_under_W indows>
The only trick is knowing exactly when to hit <enter> after the tftp
command problem. There's a narrow window between about 2-3 seconds
after you apply power that's only about 2 seconds wide. Count to 3
slowly after applying power, and hit enter. If you get a weird error
message, unplug the router, and try again with a slightly different
delay. Whatever you do, don't abort in the middle of an upload.
I haven't tried the batch file trick, but it looks quite good and
should work.
After you've successfully installed DD-WRT, subsequent updates can be
easily done from the web based menu and do not require TFTP. Update
also preserve the settings so you don't have to reload everything from
scratch. Still, it's best to make backups of your settings just in
case something goes wrong, goes wrong, goes wrong, goes wrong...
The only sure way I know how to "brick" it is to use the wrong version
firmware. I suggest generic Broadcom v23 SP3 NoKaid (not standard),
which is in the "beta" directory. This week, I've been using:
<http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fbeta%2FGENERIC%20BROADCO M%20%28Linksys%2CAsus%20etc.%29%2Fdd-wrt.v23%20SP3%2F07-13-2007%2F&download=dd-wrt.v23_std_nokaid_generic.bin>
Dated 7/13/2007. Watch out for the directory dates as they're in
European format. It's also easy to get mixed up in the mini, micro,
standard, etc versions. You want an image that's 3.2Mbytes big.
>I'm quite confused by the acronyms, buzz words and cross references to other
>protocols and documents.
I'm sympathetic. Wireless is like a loaf of bread. You eat it best
in small bites. Try to eat the whole thing at once, and you'll choke.
>So far I've come to the conclusion I need dd-wrt.v23_sp2_standard.zip
Close. I prefer the bleeding edge which is SP3. You probably won't
have any use for Kaid, which is a Xbox game server.
>The first application will be as an wireless AP and wire 4 port router.
>(only 2 or 3 ports will likely ever be used).
No problem. That's fairly basic.
>The second application will be as a client/router with four ports (I'm
>assuming this is possible/practical).
Sure. Ports are easy. If you run out of ports, just add an ethernet
switch. You can do some tricky routing and VLAN things with the
ethernet ports on the DD-WRT router, but that will be later.
>Once I manage to gain a (very) fundamental understanding of these two
>options
>I'm planning on playing other games just to see what these toys can do.
Well, Learn By Destroying(tm) is my motto. You haven't learned
anything about routers until you've totally trashed one, and had to
punch reset to recover, while the wife and kids are screaming at your
to get it back online.
>I'm at a total loss on how to proceed and would appreciate any and all
>information/links on how to get from point A to point B.
I guess just blunder your way through the Wiki at:
<http://www.dd-wrt.com/wiki/index.php/Main_Page>
There's lots of good things under there. If there's something you
find confusing, punch the buzzword into the search box and see what
pops up.
>Nice if I had a
>dummy's list of all important stopping points on the way as well as what
>other hardware I should consider for the process.
Those exist and are called FAQ's. Methinks it would be best if you
started at the top at:
<http://www.dd-wrt.com/wiki/index.php/What_is_DD-WRT%3F>
and just went through the list of features to get familiar with the
buzzwords. Then, the regular install and setup instructions should be
more comprehensible.
>My OS are XP and Mac OS10.2 (for reasons of family harmony I prefer to avoid
>using the OS 10)
>
>TIA
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
(E-Mail Removed)
#
http://802.11junk.com (E-Mail Removed)
#
http://www.LearnByDestroying.com AE6KS
Similar Threads
Linear Mode
