Users in each site use *only* their own DNS at their location.
The DNS Server then has the ISP's DNS entered into the Forwarders List in
the DNS Service's Configuration. The DNS machine must be allowed by whatever
is being used as a Firewall to be able to make outbound DNS queries tot he
ISP's DNS. It is a good idea to limit this access to only the DNS machine
and not the Users,...so as to trap any machines that has rogue DNS entries.
You could also have the DNS machine use Root Hints instead of the ISP's
DNS,...but using the ISP's DNS is the most common, and probably, the best
practice.
--
Phillip Windell
www.wandtv.com
The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------
"zachms" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
>I have just put in an MPLS network between 7 sites. All sites have the
> server in the home office listed as their DNS server. However, they
> can not ping/access the internet via host name. If I use the IP
> address I can ping and surf the net. What do I need to do on the dns
> server to allow the other networks to get dns?
>
> DNS server is 192.168.10.10
>
> I have 6 other networks, with the primary dns server set to
> 192.168.10.10. These networks are
> 192.168.11.x
> 192.168.12.x
> 192.168.13.x
> 192.168.14.x
> 192.168.15.x
> 192.168.16.x
>
> Thanks for all the help I can get.
>
Similar Threads
Linear Mode
