Multiple Public IPs and NAT

I have 2 connections to the internet, with 5 public IPs per
connection. I would like to forward all internal internet traffic on
one IP using NAT, and have the other 9 IPs able to be assigned to
computers individually or to multiple computers using port forwarding.

What is the best way to do this? I was thinking that I'd plug each
connection into a seperate NIC and then assign them their respective
IPs. However, after that I'm not quite sure.

I'm using Windows Server 2003 R2 Enterprise.

Normally what you do is, on the router:
- Create a dynamic NAT pool of one or more addresses to assign to clients.
- Assign static NAT addresses to different specific hosts
You don't have to use NAT. If you have a DMZ you can assign your valid
public addresses directly to the hosts.
Anthony
http://www.airdesk.co.uk


<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
>I have 2 connections to the internet, with 5 public IPs per
> connection. I would like to forward all internal internet traffic on
> one IP using NAT, and have the other 9 IPs able to be assigned to
> computers individually or to multiple computers using port forwarding.
>
> What is the best way to do this? I was thinking that I'd plug each
> connection into a seperate NIC and then assign them their respective
> IPs. However, after that I'm not quite sure.
>
> I'm using Windows Server 2003 R2 Enterprise.
>