Multiple MN 500's

Can these 2 me wired together so that I can have one one
one end of my house and one on the other side?

Thanks

Broadband modem --> WAN port of MN-500 #1
MN-500 #1 LAN port #2 --> WAN port of MN-500 #2
MN-500 #1 LAN port #3 --> WAN port of MN-500 #3 (if available)

Make sure all MN-500s are running the latest firmware 1.11.017

Now lets look at the setup of each MN-500:

MN-500 #1
router mode
LAN IP address at default of 192.168.2.1
some SSID
some WEP key
channel 6

MN-500 #2
bridge mode
LAN IP address at 192.168.2.42, outside of default DHCP range
same SSID
same WEP key
channel 1

MN-500 #3 (if available)
bridge mode
LAN IP address at 192.168.2.43, outside of default DHCP range
same SSID
same WEP key
channel 11


If you keep the SSID and WEP key the same for all base stations, people will
be able to move between offices and get a connection. You need to select
non-overlapping channels for the base stations to prevent interference.
Channels 1, 6, and 11 are the three non-overlapping channels. There are more
combinations if you only need two channels.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Shawn" <(E-Mail Removed)> wrote in message
news:e3cd01c43c42$0c8ea6c0$(E-Mail Removed)...
> Can these 2 me wired together so that I can have one one
> one end of my house and one on the other side?
>
> Thanks