Networking Forums

Networking Forums > Computer Networking > Linux Networking > Multilink PPP dies on LCP reconfigure

Reply
Thread Tools Display Modes

Multilink PPP dies on LCP reconfigure

 
 
John Hardin
Guest
Posts: n/a

 
      11-04-2004, 11:01 PM
All:

I'm trying to install a pair of T1s using Multilink PPP to connect my
RH 9 + Sangoma Wanpipe firewall/router to my ISP's Cisco 12016/GRP
running v12.0 of (I assume) IOS.

The PPP sessions all establish just fine, but anywhere from thirty seconds
to ten minutes from the initial connect, and occurring fairly frequently
thereafter, the Cisco starts sending LCP ConfReqs with a new magic number.

Unfortunately, this ends up killing the ppp daemon:

Nov 4 08:17:56 rhad-new ppp_debug: rcvd [LCP ConfReq id=0x4b <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:17:56 rhad-new ppp_debug: Script /etc/ppp/ip-down started (pid 27171)
Nov 4 08:17:56 rhad-new ppp_debug: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x583b2b6> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:17:56 rhad-new ppp_debug: sent [LCP ConfAck id=0x4b <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:17:56 rhad-new ppp_debug: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7191a1c5> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:17:56 rhad-new ppp_debug: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7191a1c5> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:17:56 rhad-new ppp_debug: Script /etc/ppp/ip-down finished (pid 27171), status = 0x0
Nov 4 08:17:58 rhad-new ppp_debug: rcvd [LCP ConfReq id=0x4c <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:17:58 rhad-new ppp_debug: sent [LCP ConfAck id=0x4c <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:17:59 rhad-new ppp_debug: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x583b2b6> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:18:00 rhad-new ppp_debug: rcvd [LCP ConfReq id=0x4d <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:00 rhad-new ppp_debug: sent [LCP ConfAck id=0x4d <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:02 rhad-new ppp_debug: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x583b2b6> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:18:02 rhad-new ppp_debug: rcvd [LCP ConfReq id=0x4e <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:02 rhad-new ppp_debug: sent [LCP ConfAck id=0x4e <magic 0xe23a8f46> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:04 rhad-new ppp_debug: rcvd [IPCP ConfReq id=0x36 <addr
x.x.x.x>]
Nov 4 08:18:05 rhad-new ppp_debug: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x583b2b6> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:18:05 rhad-new ppp_debug: rcvd [LCP ConfReq id=0x4f <magic 0xe23ab33a> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:05 rhad-new ppp_debug: sent [LCP ConfAck id=0x4f <magic 0xe23ab33a> <mrru 1500> <endpoint [local:73.6c.2d.67.77.35.2d.74.61.63]>]
Nov 4 08:18:05 rhad-new pppd[27149]: Couldn't attach to interface unit 0: Inappropriate ioctl for device
Nov 4 08:18:05 rhad-new ppp_debug: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x583b2b6> <mrru 1500> <endpoint [MAC:00:02:a5:8a:35:64]>]
Nov 4 08:18:05 rhad-new ppp_debug: Couldn't attach to interface unit 0: Inappropriate ioctl for device
Nov 4 08:18:06 rhad-new pppd[27149]: Exit.

If I turn off multilink, then the daemon successfully reconfigures and
reestablishes the ppp0 interface.

Can anybody provide some insight as to why this is happening?

Versions and such:

Redhat Linux 9.0
2.4.20-31.9smp kernel from the fedoralegacy site
ppp-2.4.1-10
Sangoma Wanpipe S514-7-PCI dual T1/E1 card
WANPIPE Hardware Support Module Stable 2.3.1-2

http://bugzilla.fedora.us/show_bug.cgi?id=2229

Thanks for any help.

--
John Hardin KA7OHZ <(E-Mail Removed)>
Internal Systems Administrator voice: (425) 672-1304
Apropos Retail Management Systems, Inc. fax: (425) 672-0192
-----------------------------------------------------------------------
If you smash a computer to bits with a mallet, that appears to count
as encryption in the state of Nevada.
- CRYPTO-GRAM 12/2001
-----------------------------------------------------------------------

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Automatically reconfigure Network settings for different locations ernie Wireless Networks 3 09-24-2007 05:27 PM
Reconfigure Static IP's Will Sellers Windows Networking 2 03-03-2007 02:02 PM
Not able to reconfigure RRAS on W2K3 Enterprise! Herm Windows Networking 4 04-26-2006 06:49 AM
How do I reconfigure a proxim RangeLAN2 without an IP address? Techgirl Wireless Internet 0 12-19-2005 03:28 AM
Reconfigure Base to use Wireless USB Adaptor Bruce Roberson Broadband Hardware 1 04-11-2004 03:59 PM



1 2 3 4 5 6 7 8 9 10 11