Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Motorola WR850G - inside connections

Reply
Thread Tools Display Modes

Motorola WR850G - inside connections

 
 
MousePad
Guest
Posts: n/a

 
      10-30-2004, 09:34 PM
I've got two computers connected to a Motorola WR850G wireless router: one
wired, and one wireless. Both have a DHCP address from the router. Both
can get on the Internet. I cannot ping one computer from the other. Any
idea why?

Thanks.

ADY
--
adyoung (at) sbcglobal (dot) net


 
Reply With Quote
 
 
 
 
Jeff Liebermann
Guest
Posts: n/a

 
      10-30-2004, 09:57 PM
On Sat, 30 Oct 2004 21:34:22 GMT, "MousePad"
<adyoungentirely.too.much.spam.in.my.inbox.these.d (E-Mail Removed)>
wrote:

>I've got two computers connected to a Motorola WR850G wireless router: one
>wired, and one wireless. Both have a DHCP address from the router. Both
>can get on the Internet. I cannot ping one computer from the other. Any
>idea why?


What exact operating system are the computahs using?

In you ignore the wireless part of the puzzle, and plug the computahs
directly into the switch on the back of the router for a wired LAN
connection, do you have the same problem?

Some ideas:
1. Windoze XP firewall is blocking everything.
2. Some other personal firewall is blocking pings (ZoneAlarm, Kerio,
Norton, McAffee, Black Ice Defender, etc)

I've seen some really weird things with ping, where Windoze ICMP ping
doesn't work, but Linux UDP ping does work. It's usually buggy
firmware of some setting that has an undesired affect ( such as block
pings from WAN).


--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558
 
Reply With Quote
 
Airhead
Guest
Posts: n/a

 
      10-30-2004, 10:09 PM
do you have a firewall? disable it and try it if yo do, or allow the
firewall to pass ICMP (i think thats tit)
"MousePad"
<adyoungentirely.too.much.spam.in.my.inbox.these.d (E-Mail Removed)> wrote
in message news:yNTgd.7115$(E-Mail Removed) m...
> I've got two computers connected to a Motorola WR850G wireless router:

one
> wired, and one wireless. Both have a DHCP address from the router. Both
> can get on the Internet. I cannot ping one computer from the other. Any
> idea why?
>
> Thanks.
>
> ADY
> --
> adyoung (at) sbcglobal (dot) net
>
>



 
Reply With Quote
 
MousePad
Guest
Posts: n/a

 
      10-30-2004, 11:17 PM

"Jeff Liebermann" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...


> What exact operating system are the computahs using?
>
> In you ignore the wireless part of the puzzle, and plug the computahs
> directly into the switch on the back of the router for a wired LAN
> connection, do you have the same problem?
>
> Some ideas:
> 1. Windoze XP firewall is blocking everything.


Okay, yup, that was it. I disabled the firewall and it works.

What port do I need to open up for Ping? I tried opening 5813, but it
didn't work.

ADY


 
Reply With Quote
 
Jeff Liebermann
Guest
Posts: n/a

 
      10-31-2004, 12:01 AM
On Sat, 30 Oct 2004 23:17:21 GMT, "MousePad"
<adyoungentirely.too.much.spam.in.my.inbox.these.d (E-Mail Removed)>
wrote:

>
>"Jeff Liebermann" <(E-Mail Removed)> wrote in message
>news:(E-Mail Removed).. .
>
>
>> What exact operating system are the computahs using?
>>
>> In you ignore the wireless part of the puzzle, and plug the computahs
>> directly into the switch on the back of the router for a wired LAN
>> connection, do you have the same problem?
>>
>> Some ideas:
>> 1. Windoze XP firewall is blocking everything.


>Okay, yup, that was it. I disabled the firewall and it works.


>What port do I need to open up for Ping? I tried opening 5813, but it
>didn't work.


Thanks for not bothering to disclose exactly what version of Windoze
you're using. I'll assume that "the firewall" implies Windoze XP Home
SP2.

Windoze ping uses ICMP which does't have a dedicated port number. I
have not idea what 5318 is suppose to do. It's not on the "well
known" IP ports numbers list.

Start -> Run -> Firewall.cpl
Hit the exceptions tab and check the "File and Print Sharing" tab.

However, I don't think that will work. Ping should be enabled by
default between machines on the same LAN and has nothing to do with
File and Print Sharing. However, you'll need it enabled anyway if
you're gonna move files between machines.

Start -> Run -> Firewall.cpl
Hit the Advanced tab and go down to ICMP -> Settings. Make sure ICMP
Echo is enabled.



--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Motorola WR850G Gene Seibel Wireless Internet 2 03-26-2007 04:13 AM
Motorola WR850G / WR850GP 6.14 Firmware OUT! trevi55@gmail.com Wireless Internet 12 10-04-2005 04:56 PM
Motorola WR850G Mistaya Wireless Internet 2 08-24-2005 04:24 PM
Motorola WR850G Don Wireless Internet 0 09-25-2004 04:14 AM
Need help with Motorola WR850G router Andy in NJ Network Routers 0 09-24-2004 04:03 AM



1 2 3 4 5 6 7 8 9 10 11