More public (RIPE) addr. on the LAN side on a Linksys RVS4000 router

I have a RVS4000 router.
I have just got 8 public (RIPE) addresses I want to setup on the LAN side of
the router.

How do I configure the router to forward traffic from the WAN side to the
LAN side?

My setup is:

WAN address: 87.58.248.146
LAN addresses: 87.49.143.64/29 (255.255.255.248)
On the LAN side the router got this addr: 87.49.143.65.

My ISP is forwarding all traffic to this space: 87.49.143.64/29 to
87.58.248.146 and it's now my routers role to accept incoming traffic and
hit the correct addresss on the LAN side. And here is the problem...

Anybody with idéeas?


Regards, Brian

On Nov 11, 3:49 am, "Brian Vind" <find-den-her: www.qrz.com> wrote:
> I have a RVS4000 router.
> I have just got 8 public (RIPE) addresses I want to setup on the LAN sideof
> the router.
>
> How do I configure the router to forward traffic from the WAN side to the
> LAN side?
>
> My setup is:
>
> WAN address: 87.58.248.146
> LAN addresses: 87.49.143.64/29 (255.255.255.248)
> On the LAN side the router got this addr: 87.49.143.65.
>
> My ISP is forwarding all traffic to this space: 87.49.143.64/29 to
> 87.58.248.146 and it's now my routers role to accept incoming traffic and
> hit the correct addresss on the LAN side. And here is the problem...
>
> Anybody with idéeas?
>
> Regards, Brian

Brian,

A quick REview of the manual, indicates that no such capability is
allowed on this router. Specifially under specifications on the last
pages see, NAT: PAT, NAPT.
These won't allow for this.

http://www.linksys.com/servlet/Satel...=1150490915278

LC.