Monitoring bandwidth using SNMP with D-Link DWL2000?

I have a D-Link DWL-2000 access point and I have just downloded PRTG:
http://www.paessler.com/prtg
Will this work with the D-Link to monitor bandwidth use etc on the network?

I have just found the following setting in my AP, but does anyone know
which bits need filling in for it to work?

From the
SNMP Options

SNMP Enable/Disable

System Location: [What goes here?]
System Contact: [What goes here?]
Community: public [does this need changing?]

Trap Receiver 1 0.0.0.0 [what goes here?]
Trap Receiver 2 0.0.0.0 [what goes here?]
Trap Receiver 3 0.0.0.0 [what goes here?]


Thanks Josh

Josh! wrote:
> I have a D-Link DWL-2000 access point and I have just downloded PRTG:
> http://www.paessler.com/prtg
> Will this work with the D-Link to monitor bandwidth use etc on the
> network?

Probably

> I have just found the following setting in my AP, but does anyone know
> which bits need filling in for it to work?
>
> From the
> SNMP Options
>
> SNMP Enable/Disable
>
> System Location: [What goes here?]

Anything you want , it's just for your reference.

> System Contact: [What goes here?]

As above

> Community: public [does this need changing?]

Nope , although changing it from default will make it harder for other
people to have a nose.

> Trap Receiver 1 0.0.0.0 [what goes here?]

The IP address of your PC/server running the SNMP software.

--
Alex

Hermes: "We can't afford that! Especially not Zoidberg!"
Zoidberg: "They took away my credit cards!"

www.drzoidberg.co.uk
www.sffh.co.uk
www.ebayfaq.co.uk

"Dr Zoidberg" <AlexNOOOOO!!!!!@drzoidberg.co.uk> wrote in message
news:(E-Mail Removed)...
> Josh! wrote:
>> I have a D-Link DWL-2000 access point and I have just downloded PRTG:
>> http://www.paessler.com/prtg
>> Will this work with the D-Link to monitor bandwidth use etc on the
>> network?
>
> Probably
>
I don't think the D-Link has MIB, so it WONT work with that software I
think.
Comments anyone?