here's what i did--
i have an mn-730 trying to connect to a linksys router and
i had this problem forever. i screwed around with the
settings long enough and finally got it--
i would recommend trying to configure your 720 so that the
preamble is set on "long," and this setting has to be the
same on the router. that's what i did and it worked. this
isn't done through a wizard (as far as i know), you have to
manually do it under the actual device configuration.
i've gotten it to work with and without dhcp... if you
still can't get an ip, try manually setting that, too,
keeping in mind which ones the router is configured to use.
>-----Original Message-----
>I've seen this same problem posted a few times and
>haven't really seen any solutions...
>
>I'm trying to connect an xp home edition computer to my
>wireless network using the WN720 adapter (i've got the
>broadband kit with the router and all).
>
>No matter what I do each time I try to connect I get the
>invalid WEP error. I have turned off the encryption
>completely on the router, the wireless recognizes no
>encryption, attempts to connect, and then tells me
>invalid WEP! I've tried creating this connection
>manually using the xp utilities but this doesn't work
>either. tech support worked with me for about 3 hours
>with no luck. What's the deal?
>
>the wireless sees the routher, sends info, but never
>connects (never gets an ip from the dhcp server). I'm
>about to take this thing back...any ideas.
>.
>
|
Similar Threads
Linear Mode
