mn-740 and multiple devices

I tried to bridge multiple devices using the mn-740. I
have the wireless adapter hooked up to a hub, and xbox and
a computer hooked up to the hub. I can use either the xbox
or the computer by themselves, but if I try to use them
both at the same time, everything stops working. Is there
a way to use the mn-740 in such a way? Also, is there a
way to configure the adapter from a computer once the
initial setup has taken place?

The MN740 can only be configured with the xbox.

Recommend you try a switch in place of the hub.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"ace" <(E-Mail Removed)> wrote in message
news:322701c48f07$1b78ef70$(E-Mail Removed)...
>I tried to bridge multiple devices using the mn-740. I
> have the wireless adapter hooked up to a hub, and xbox and
> a computer hooked up to the hub. I can use either the xbox
> or the computer by themselves, but if I try to use them
> both at the same time, everything stops working. Is there
> a way to use the mn-740 in such a way? Also, is there a
> way to configure the adapter from a computer once the
> initial setup has taken place?
>
>

Using a netgear 5 port switch. Does the same thing. Is
this a limitation of the xbox adapter?


>-----Original Message-----
>The MN740 can only be configured with the xbox.
>
>Recommend you try a switch in place of the hub.
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
>"ace" <(E-Mail Removed)> wrote in message
>news:322701c48f07$1b78ef70$(E-Mail Removed)...
>>I tried to bridge multiple devices using the mn-740. I
>> have the wireless adapter hooked up to a hub, and xbox and
>> a computer hooked up to the hub. I can use either the xbox
>> or the computer by themselves, but if I try to use them
>> both at the same time, everything stops working. Is there
>> a way to use the mn-740 in such a way? Also, is there a
>> way to configure the adapter from a computer once the
>> initial setup has taken place?
>>
>>
>
>
>.
>

No a Switch recognizes the MAC address the a packet is being sent to &
only sends that packet to the port that has that MAC address on it. A
hub is really stupid as it will just send the data to every port no
matter what. Thus a hub wastes bandwidth while a switch saves it. Now
you know the difference.

ace wrote:

> Using a netgear 5 port switch. Does the same thing. Is
> this a limitation of the xbox adapter?
>
>
>
>>-----Original Message-----
>>The MN740 can only be configured with the xbox.
>>
>>Recommend you try a switch in place of the hub.
>>
>>--
>>Jason Tsang - Microsoft MVP
>>
>>Find out about the MS MVP Program -
>>http://mvp.support.microsoft.com/default.aspx
>>
>>"ace" <(E-Mail Removed)> wrote in message
>>news:322701c48f07$1b78ef70$(E-Mail Removed)...
>>
>>>I tried to bridge multiple devices using the mn-740. I
>>>have the wireless adapter hooked up to a hub, and xbox and
>>>a computer hooked up to the hub. I can use either the xbox
>>>or the computer by themselves, but if I try to use them
>>>both at the same time, everything stops working. Is there
>>>a way to use the mn-740 in such a way? Also, is there a
>>>way to configure the adapter from a computer once the
>>>initial setup has taken place?
>>>
>>>
>>
>>
>>.
>>

Using a switch. FS105. Still only works with one device
at a time. Is this a limitation of the mn-740?


>-----Original Message-----
>No a Switch recognizes the MAC address the a packet is
being sent to &
>only sends that packet to the port that has that MAC
address on it. A
>hub is really stupid as it will just send the data to
every port no
>matter what. Thus a hub wastes bandwidth while a switch
saves it. Now
>you know the difference.
>
>ace wrote:
>
>> Using a netgear 5 port switch. Does the same thing. Is
>> this a limitation of the xbox adapter?
>>
>>
>>
>>>-----Original Message-----
>>>The MN740 can only be configured with the xbox.
>>>
>>>Recommend you try a switch in place of the hub.
>>>
>>>--
>>>Jason Tsang - Microsoft MVP
>>>
>>>Find out about the MS MVP Program -
>>>http://mvp.support.microsoft.com/default.aspx
>>>
>>>"ace" <(E-Mail Removed)> wrote in
message
>>>news:322701c48f07$1b78ef70$(E-Mail Removed).. .
>>>
>>>>I tried to bridge multiple devices using the mn-740. I
>>>>have the wireless adapter hooked up to a hub, and xbox and
>>>>a computer hooked up to the hub. I can use either the xbox
>>>>or the computer by themselves, but if I try to use them
>>>>both at the same time, everything stops working. Is there
>>>>a way to use the mn-740 in such a way? Also, is there a
>>>>way to configure the adapter from a computer once the
>>>>initial setup has taken place?
>>>>
>>>>
>>>
>>>
>>>.
>>>
>
>.
>