Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > MN-730 Problem

Reply
Thread Tools Display Modes

MN-730 Problem

 
 
Bird
Guest
Posts: n/a

 
      06-08-2004, 03:23 AM
I have the MN-730 G PCI card and I was connected and
everything worked fine, but then I turned on my computer
and now it wont pick up anything. I have the USB microsoft
wireless adapter on a computer and the PCMCIA one on a
laptop and no problems with those at all. I have the
Wireless B router. This is strange because I put the PCI
card in my brothers and took his USB for a while and it
worked fine. Then it was just that time to reinstall
windows and after I reinstalled it, it worked fine for like
20 boots and now its back to the same old thing where it
wont pick anything up. I switched to Ad Hoc mode and it
connected, but didnt connect to the internet. This is
strange and I've tried a lot. Any Ideas? Very Frustrating!
 
Reply With Quote
 
 
 
 
Guest
Posts: n/a

 
      06-08-2004, 07:18 AM
I downloaded the default XP Pro service profile and it now
picks up the base station, but still won't connect, it just
tries to connect and then goes back to saying 'One or more
wireless networks are avalable......'
>-----Original Message-----
>I have the MN-730 G PCI card and I was connected and
>everything worked fine, but then I turned on my computer
>and now it wont pick up anything. I have the USB microsoft
>wireless adapter on a computer and the PCMCIA one on a
>laptop and no problems with those at all. I have the
>Wireless B router. This is strange because I put the PCI
>card in my brothers and took his USB for a while and it
>worked fine. Then it was just that time to reinstall
>windows and after I reinstalled it, it worked fine for like
>20 boots and now its back to the same old thing where it
>wont pick anything up. I switched to Ad Hoc mode and it
>connected, but didnt connect to the internet. This is
>strange and I've tried a lot. Any Ideas? Very Frustrating!
>.
>

 
Reply With Quote
 
Guest
Posts: n/a

 
      06-08-2004, 07:37 AM
ah fixed it, just had to change the channel
>-----Original Message-----
>I downloaded the default XP Pro service profile and it now
>picks up the base station, but still won't connect, it just
>tries to connect and then goes back to saying 'One or more
>wireless networks are avalable......'
>>-----Original Message-----
>>I have the MN-730 G PCI card and I was connected and
>>everything worked fine, but then I turned on my computer
>>and now it wont pick up anything. I have the USB microsoft
>>wireless adapter on a computer and the PCMCIA one on a
>>laptop and no problems with those at all. I have the
>>Wireless B router. This is strange because I put the PCI
>>card in my brothers and took his USB for a while and it
>>worked fine. Then it was just that time to reinstall
>>windows and after I reinstalled it, it worked fine for like
>>20 boots and now its back to the same old thing where it
>>wont pick anything up. I switched to Ad Hoc mode and it
>>connected, but didnt connect to the internet. This is
>>strange and I've tried a lot. Any Ideas? Very Frustrating!
>>.
>>

>.
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange problem: no problem with Linux, when I boot windows 2K network is down... Santa Linux Networking 11 11-29-2004 07:46 AM



1 2 3 4 5 6 7 8 9 10 11