mn-710 speed only 11mbps

I have 3 MN-710 USB 2.0 adapters running peer-to-peer.
The speed is only 11mbps when I put the cursor over the
icon on the task bar.
Is there a way to configure g-only speed for peer-to-peer?

Are the USB ports that you are plugging these devices into USB 2.0 or 1.x?
If the latter, you won't be able to get any faster than 12 mbps at all.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Johnb" <(E-Mail Removed)> wrote in message
news:19b3d01c41cee$805d2a40$(E-Mail Removed)...
> I have 3 MN-710 USB 2.0 adapters running peer-to-peer.
> The speed is only 11mbps when I put the cursor over the
> icon on the task bar.
> Is there a way to configure g-only speed for peer-to-peer?

Yes, all are Adaptec USB 2.0 controllers.

Also, I can't seem to switch channels.
Everyone in my neighborhood is using channel 11.
Unfortunately that is the channel I initially selected.

Do I have to change all my channels at once?
Will the software try to match a strong signal and
override the channel I select with the channel it sees?

>-----Original Message-----
>Are the USB ports that you are plugging these devices
into USB 2.0 or 1.x?
>If the latter, you won't be able to get any faster than
12 mbps at all.
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
>"Johnb" <(E-Mail Removed)> wrote in message
>news:19b3d01c41cee$805d2a40$(E-Mail Removed)...
>> I have 3 MN-710 USB 2.0 adapters running peer-to-peer.
>> The speed is only 11mbps when I put the cursor over the
>> icon on the task bar.
>> Is there a way to configure g-only speed for peer-to-
peer?
>
>
>.
>

Yep, looks like only one adapter can be active
to switch channels. If two adapters are active then
one will not switch channels, will just be 'stuck'
on the current channel.
After the first adapter changes, then the other adapters
can be enabled and changed.

>-----Original Message-----
>Yes, all are Adaptec USB 2.0 controllers.
>
>Also, I can't seem to switch channels.
>Everyone in my neighborhood is using channel 11.
>Unfortunately that is the channel I initially selected.
>
>Do I have to change all my channels at once?
>Will the software try to match a strong signal and
>override the channel I select with the channel it sees?
>
>>-----Original Message-----
>>Are the USB ports that you are plugging these devices
>into USB 2.0 or 1.x?
>>If the latter, you won't be able to get any faster than
>12 mbps at all.
>>
>>--
>>Jason Tsang - Microsoft MVP
>>
>>Find out about the MS MVP Program -
>>http://mvp.support.microsoft.com/default.aspx
>>
>>"Johnb" <(E-Mail Removed)> wrote in message
>>news:19b3d01c41cee$805d2a40$(E-Mail Removed).. .
>>> I have 3 MN-710 USB 2.0 adapters running peer-to-peer.
>>> The speed is only 11mbps when I put the cursor over the
>>> icon on the task bar.
>>> Is there a way to configure g-only speed for peer-to-
>peer?
>>
>>
>>.
>>
>.
>