Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > MN-700 working with other brands

Reply
Thread Tools Display Modes

MN-700 working with other brands

 
 
biggiepates
Guest
Posts: n/a

 
      04-28-2004, 06:08 AM
I bought the MN-700 wireless router. I got the wireless
to connection to work on my laptop with a integrated
wireless g card. But on my other laptop with a wireless
adapter b card it doesnt work. The network shows up but
will not connect. I have my wireless set to accept
both. It is an Orinico Gold 802.11b card. Oh also I
reset the base station and turned off all firewalls. Any
hints or suggestion would be nice.

Thanks
 
Reply With Quote
 
 
 
 
Chris H.
Guest
Posts: n/a

 
      04-28-2004, 06:23 AM
Go into Command Prompt (on XP, not just Start/Run) and at the prompt type in
"ipconfig" without the quotes. See if it is returning a proper IP address
for your non-cooperative laptop. If it shows a 169.x.x.x address, you're
not part of the LAN sequence. Try doing "ipconfig /release" followed by
"ipconfig /renew" (without quotes) to see if it'll pick up the DHCP address
feed from the MN-700.
--
Chris H.
Microsoft Windows MVP
http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"biggiepates" <(E-Mail Removed)> wrote in message
news:52a401c42ce7$49af9dd0$(E-Mail Removed)...
>I bought the MN-700 wireless router. I got the wireless
> to connection to work on my laptop with a integrated
> wireless g card. But on my other laptop with a wireless
> adapter b card it doesnt work. The network shows up but
> will not connect. I have my wireless set to accept
> both. It is an Orinico Gold 802.11b card. Oh also I
> reset the base station and turned off all firewalls. Any
> hints or suggestion would be nice.
>
> Thanks



 
Reply With Quote
 
a931048
Guest
Posts: n/a

 
      04-28-2004, 05:29 PM
Follow the steps suggested by Chris.

Are you using WEP? If you are using WEP try disabling it.
I have an Orinoco Silver 802.11b card that won't connect
when 128 bt WEP is enabled. I had to use 64bit WEP. I have
also a usb wireless adapter by smc which works fine with
128bit WEP. My router is mn-500 and this particular
problem seems to be with the Orinoco card itself.


>-----Original Message-----
>I bought the MN-700 wireless router. I got the wireless
>to connection to work on my laptop with a integrated
>wireless g card. But on my other laptop with a wireless
>adapter b card it doesnt work. The network shows up but
>will not connect. I have my wireless set to accept
>both. It is an Orinico Gold 802.11b card. Oh also I
>reset the base station and turned off all firewalls. Any
>hints or suggestion would be nice.
>
>Thanks
>.
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: BEST BRANDS PORTAL Roger Home Networking 0 09-09-2009 11:04 AM
Mix Matching Brands Ron Wireless Internet 6 08-10-2004 06:11 PM
Different brands of AP's and cards - what to use? Andy S. Wireless Internet 5 07-28-2004 12:36 PM
WPA between two brands of 802.11g devices? PT Wang Wireless Internet 4 12-24-2003 03:41 PM
Ad-Hoc between different brands of W-NIC - Newbie Martin Stennett Wireless Internet 1 08-29-2003 04:19 AM



1 2 3 4 5 6 7 8 9 10 11