MN- 700 Wireless G Router

I have just installed the router, it works fine with
ethernet cables, the problem is I cannot connect with
wireless centrino notebook. I can't figure out the
problem. I the signal shows EXCELLENT and in the status
box I am not receiving any packets.

Please let me know what is the problem and how to fix it.

Thanks

Are you running encryption, and entered that code in properly? If so, try
going to the Command Prompt and typing in "ipconfig" without the quote
marks. If it doesn't return an IP address within the default 192.168.2.1
realm, type "ipconfig /release" followed by "ipconfig /renew" - again
without the quotations. Also, go into Network Connections, right-click the
icon representing your LAN and select Properties. Go to the Wireless
Networks tab, then - with your LAN highlighted in the bottom box, click the
Advanced button. Make sure you're on "Access point (infrastructure)
networks only."
--
Chris H.
Microsoft Windows MVP
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Raheel" <(E-Mail Removed)> wrote in message
news:1f93101c457ff$d5253940$(E-Mail Removed)...
>I have just installed the router, it works fine with
> ethernet cables, the problem is I cannot connect with
> wireless centrino notebook. I can't figure out the
> problem. I the signal shows EXCELLENT and in the status
> box I am not receiving any packets.
>
> Please let me know what is the problem and how to fix it.
>
> Thanks