MN-700 REMOTE ACCESS

Does the MN-700 offer a remote management feature from
outside of the network ? For example, I am at one office,
and want to go into the router from another office (two
separate networks and ISPs) to perform some management or
admin functions. I can do that with my LINKSYS router,
but can't find the same type of area (remote management
and port ID) that I have enabled on the LINKSYS.

Thanks -

BWC

no.


"BWC" <(E-Mail Removed)> wrote in message
news:1fd301c4fdaa$d177bf10$(E-Mail Removed)...
> Does the MN-700 offer a remote management feature from
> outside of the network ? For example, I am at one office,
> and want to go into the router from another office (two
> separate networks and ISPs) to perform some management or
> admin functions. I can do that with my LINKSYS router,
> but can't find the same type of area (remote management
> and port ID) that I have enabled on the LINKSYS.
>
> Thanks -
>
> BWC

No, it does not... however, if you can remotely connect to a machine inside
your network, you can connect to the BSMT from that connection.


--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"BWC" <(E-Mail Removed)> wrote in message
news:1fd301c4fdaa$d177bf10$(E-Mail Removed)...
> Does the MN-700 offer a remote management feature from
> outside of the network ? For example, I am at one office,
> and want to go into the router from another office (two
> separate networks and ISPs) to perform some management or
> admin functions. I can do that with my LINKSYS router,
> but can't find the same type of area (remote management
> and port ID) that I have enabled on the LINKSYS.
>
> Thanks -
>
> BWC

Thanks for the responses. I was afraid of that, but
wanted a second opinion.

r/BWC


>-----Original Message-----
>Does the MN-700 offer a remote management feature from
>outside of the network ? For example, I am at one
office,
>and want to go into the router from another office (two
>separate networks and ISPs) to perform some management or
>admin functions. I can do that with my LINKSYS router,
>but can't find the same type of area (remote management
>and port ID) that I have enabled on the LINKSYS.
>
>Thanks -
>
>BWC
>.
>