MN-700-No Power LED?

My MN-700 has been working great for about 4 months.
Today, it seemed to stop and I did a reset. The modem
LED lights up, but the Power LED does not. Anybody seen
this before?

If the power LED is out and the MN 700 is not working after a reset then
something may be wrong in its power supply. Is it still under warranty? If
it is, take it in and have it looked at.


"(E-Mail Removed)" <(E-Mail Removed)> wrote in message
news:69bc01c48315$dae37c70$(E-Mail Removed)...
> My MN-700 has been working great for about 4 months.
> Today, it seemed to stop and I did a reset. The modem
> LED lights up, but the Power LED does not. Anybody seen
> this before?

That is the strange thing. I plug in the power and the
modem LED comes on, but not the Power Light. The unit
still does not function after a reboot or a reset. I
think it is dead. I should still be under warranty since
it only has been 4 months.


>-----Original Message-----
>If the power LED is out and the MN 700 is not working
after a reset then
>something may be wrong in its power supply. Is it still
under warranty? If
>it is, take it in and have it looked at.
>
>
>"(E-Mail Removed)"
<(E-Mail Removed)> wrote in message
>news:69bc01c48315$dae37c70$(E-Mail Removed)...
>> My MN-700 has been working great for about 4 months.
>> Today, it seemed to stop and I did a reset. The modem
>> LED lights up, but the Power LED does not. Anybody
seen
>> this before?
>
>
>.
>

something similar happened to me last week. my MN-700 failed while it
was online and working and only the modem line was working (blinking).
no power light, no way to reset it and get the condition to change..
and thus I could not use it. i can leave it unplugged and sometimes
it will recover and work normally. i then plug it in and in about an
hour later it goes into this condition. the environment is air
conditioned, the unit was connected to a UPS that protects against
current over and under scenarios. it is not the cable modem as any
other router i plug into that modem works fine. also plugging the
MN-700 into other outlets does not change the situation.

On Sun, 15 Aug 2004 18:44:51 -0700, "Norman"
<(E-Mail Removed)> wrote:

>That is the strange thing. I plug in the power and the
>modem LED comes on, but not the Power Light. The unit
>still does not function after a reboot or a reset. I
>think it is dead. I should still be under warranty since
>it only has been 4 months.
>
>
>>-----Original Message-----
>>If the power LED is out and the MN 700 is not working
>after a reset then
>>something may be wrong in its power supply. Is it still
>under warranty? If
>>it is, take it in and have it looked at.
>>
>>
>>"(E-Mail Removed)"
><(E-Mail Removed)> wrote in message
>>news:69bc01c48315$dae37c70$(E-Mail Removed)...
>>> My MN-700 has been working great for about 4 months.
>>> Today, it seemed to stop and I did a reset. The modem
>>> LED lights up, but the Power LED does not. Anybody
>seen
>>> this before?
>>
>>
>>.
>>

--
Barb Bowman
Expert Zone Columnist
http://www.microsoft.com/windowsxp/expertzone
MS-MVP (Windows)