Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > MN-520 can it be setup as an access point?

Reply
Thread Tools Display Modes

MN-520 can it be setup as an access point?

 
 
Greg
Guest
Posts: n/a

 
      03-30-2005, 06:28 PM
I am trying to setup my MN-520 wireless network card so
that it broadcasts a network signal. Is this possible?
This is the setup:
1.The card is in my laptop
2.my laptop is connected by an ethernet cable to an
ethernet hub
3.the hub is connected to a wired router

So the question is: Can I send the wired ethernet
connection to my MN-520 to broadcast a signal for others
to use?

If not what would be the most inexpensive way to
broadcast a signal?

 
Reply With Quote
 
 
 
 
Gary
Guest
Posts: n/a

 
      03-30-2005, 07:02 PM
The MN-520 will only receive a wireless signal.
You have to have a wireless router to broadcast a signal
for other wireless devices to use. The MN-500 routers on
eBay can be yours for less than $20. It will have to be
connected to the hub with a ethernet cable.


>-----Original Message-----
>I am trying to setup my MN-520 wireless network card so
>that it broadcasts a network signal. Is this possible?
>This is the setup:
>1.The card is in my laptop
>2.my laptop is connected by an ethernet cable to an
>ethernet hub
>3.the hub is connected to a wired router
>
>So the question is: Can I send the wired ethernet
>connection to my MN-520 to broadcast a signal for others
>to use?
>
>If not what would be the most inexpensive way to
>broadcast a signal?
>
>.
>

 
Reply With Quote
 
Greg
Guest
Posts: n/a

 
      03-30-2005, 07:06 PM
thanks 4 the info


>-----Original Message-----
>The MN-520 will only receive a wireless signal.
>You have to have a wireless router to broadcast a signal
>for other wireless devices to use. The MN-500 routers on
>eBay can be yours for less than $20. It will have to be
>connected to the hub with a ethernet cable.
>
>
>>-----Original Message-----
>>I am trying to setup my MN-520 wireless network card so
>>that it broadcasts a network signal. Is this possible?
>>This is the setup:
>>1.The card is in my laptop
>>2.my laptop is connected by an ethernet cable to an
>>ethernet hub
>>3.the hub is connected to a wired router
>>
>>So the question is: Can I send the wired ethernet
>>connection to my MN-520 to broadcast a signal for

others
>>to use?
>>
>>If not what would be the most inexpensive way to
>>broadcast a signal?
>>
>>.
>>

>.
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to setup a wireless Access point? Anim Home Networking 3 12-22-2006 01:38 PM
Can't access access point's setup page str0be Home Networking 18 03-15-2006 11:41 PM
Access Point Setup rick Broadband Hardware 1 03-08-2005 11:04 PM
MN-700 access point setup Thomas Broadband Hardware 3 08-03-2004 10:56 PM
Setup of new Wireless-G Access Point Tim Wireless Networks 5 07-18-2004 09:55 PM



1 2 3 4 5 6 7 8 9 10 11