MN-510 packet loss with MN-500

Hello,

I am running WinXP with all updates/SP1 and am using
a MN-510 (USB NIC) to interface with a MN-500 router.
When I play a video game online, I notice every few
minutes I will get a ~two second lag in the game. If I
use a CAT5 cable to my built in NIC via the MN-500 router,
everything is perfect. This has showed me the MN-
510/wireless settings are to blame. I saw a KB article
regarding disabling 802.1x authentication as a solution
for this. I have done this a few days ago, rebooted a few
times since then, and the problem has not gone away. I
just checked now and "Enable IEEE 802.1x authentication
for this network" is NOT checked. In the past, it has
worked fine, however I've updated to the latest firmware
since then (1.11.017). I am hoping someone can point me
in the right direction. Thanks

I am experiencing the same issue. Quite frustrating. I
have found no info other places to help with this so
far. A damn shame as everything else about this system
seems to be flawless and works like a charm.

>-----Original Message-----
>Hello,
>
> I am running WinXP with all updates/SP1 and am
using
>a MN-510 (USB NIC) to interface with a MN-500 router.
>When I play a video game online, I notice every few
>minutes I will get a ~two second lag in the game. If I
>use a CAT5 cable to my built in NIC via the MN-500
router,
>everything is perfect. This has showed me the MN-
>510/wireless settings are to blame. I saw a KB article
>regarding disabling 802.1x authentication as a solution
>for this. I have done this a few days ago, rebooted a
few
>times since then, and the problem has not gone away. I
>just checked now and "Enable IEEE 802.1x authentication
>for this network" is NOT checked. In the past, it has
>worked fine, however I've updated to the latest firmware
>since then (1.11.017). I am hoping someone can point me
>in the right direction. Thanks
>.
>