MN- 510 - Can it do WPA??

I recently replaced my MN-500 router, because my network mysteriously stopped
working. I purchased a Linksys WRT54G and USB receiver from Linksys. I set it
up with the higher WPA security settings, and according to MS documentation,
the MN-510 should support this as well. The only thing is when I try to use
this with the Network Broadband Utility, there is no way to choose WPA as a
security option. I tried entering my Pass Key for WPA and it says it's
looking for 26 characters, blah, blah... So needless to say, I can't see my
network from the computer the MN-510 is hooked up to. I downloaded the latest
software and firmware updates for the MN-510, and still no luck. If anyone
can help me with this - it would be MOST appreciated!

Thanks!

If using WindowsXP SP2, use the Windows setup for your MN-510.

"Thrawn" <(E-Mail Removed)> wrote in message
news:A9512E9F-D14F-4C17-A05A-(E-Mail Removed)...
>I recently replaced my MN-500 router, because my network mysteriously
>stopped
> working. I purchased a Linksys WRT54G and USB receiver from Linksys. I set
> it
> up with the higher WPA security settings, and according to MS
> documentation,
> the MN-510 should support this as well. The only thing is when I try to
> use
> this with the Network Broadband Utility, there is no way to choose WPA as
> a
> security option. I tried entering my Pass Key for WPA and it says it's
> looking for 26 characters, blah, blah... So needless to say, I can't see
> my
> network from the computer the MN-510 is hooked up to. I downloaded the
> latest
> software and firmware updates for the MN-510, and still no luck. If anyone
> can help me with this - it would be MOST appreciated!
>
> Thanks!

Thanks for the reply. What if I am using Win98 SE or Win2K?? Is it still
possible??
I hope...

"Christian" wrote:

> If using WindowsXP SP2, use the Windows setup for your MN-510.
>
> "Thrawn" <(E-Mail Removed)> wrote in message
> news:A9512E9F-D14F-4C17-A05A-(E-Mail Removed)...
> >I recently replaced my MN-500 router, because my network mysteriously
> >stopped
> > working. I purchased a Linksys WRT54G and USB receiver from Linksys. I set
> > it
> > up with the higher WPA security settings, and according to MS
> > documentation,
> > the MN-510 should support this as well. The only thing is when I try to
> > use
> > this with the Network Broadband Utility, there is no way to choose WPA as
> > a
> > security option. I tried entering my Pass Key for WPA and it says it's
> > looking for 26 characters, blah, blah... So needless to say, I can't see
> > my
> > network from the computer the MN-510 is hooked up to. I downloaded the
> > latest
> > software and firmware updates for the MN-510, and still no luck. If anyone
> > can help me with this - it would be MOST appreciated!
> >
> > Thanks!
>
>
>