mn-500 disconnects

is there a flaw in the firmware and ppoe now? the router
resets alot on its own

what firmware is in the 500? Have you applied the latest available
upgrade? Can you define "alot" and can you post a copy of the log file
from the mn500?

On Sat, 17 Jan 2004 00:02:01 -0800, "Angelo"
<(E-Mail Removed)> wrote:

>is there a flaw in the firmware and ppoe now? the router
>resets alot on its own

--
Barb Bowman
Expert Zone Columnist
http://www.microsoft.com/windowsxp/expertzone
MS-MVP (Windows)

If you are receiving a PADT when the Internet stops working it is your
ISP killing the Internet connection. If that is the case then browse to
http://192.168.2.1 then go to the "Wide Area Network" page put a check
in "Auto-reconnect" & set the "Maximum idle time" to something like 600.

Angelo wrote:

> is there a flaw in the firmware and ppoe now? the router
> resets alot on its own

it works perfectly before the firmware upgrade for this
problem... had others taht are now fixed but i have this
prob now lol

this is pushing to go back to enterprise routers never a
prob like this



Base Station Information

Runtime code version: V1.11.017
Boot code version: V1.02
LAN MAC address: 00-50-F2-C3-BB-6A
MAC address: 00-0C-6E-6E-F9-1B
Serial number: A238049974

2004/01/17 19:52:26 (IP Address has been removed for
security reasons)login successful
2004/01/17 19:53:19 PPPoE stop PPP
2004/01/17 19:53:19 PPPoE stop
2004/01/17 19:53:21 PPPoE send PADI
2004/01/17 19:53:21 PPPoE receive PADO
2004/01/17 19:53:21 PPPoE send PADR
2004/01/17 19:53:21 PPPoE receive PADS
2004/01/17 19:53:21 PPPoE start PPP
2004/01/17 19:53:24 Username and Password : OK
2004/01/17 19:53:29 PPPoE get IP : (IP Address has been
removed for security reasons)




>-----Original Message-----
>what firmware is in the 500? Have you applied the latest
available
>upgrade? Can you define "alot" and can you post a copy
of the log file
>from the mn500?
>
>On Sat, 17 Jan 2004 00:02:01 -0800, "Angelo"
><(E-Mail Removed)> wrote:
>
>>is there a flaw in the firmware and ppoe now? the
router
>>resets alot on its own
>
>--
>Barb Bowman
>Expert Zone Columnist
>http://www.microsoft.com/windowsxp/expertzone
>MS-MVP (Windows)
>.
>

Have you powered the unit off for a minute or so and then restarted it? If
not, try that.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

<(E-Mail Removed)> wrote in message
news:01d501c3dd60$cabc1ab0$(E-Mail Removed)...
> it works perfectly before the firmware upgrade for this
> problem... had others taht are now fixed but i have this
> prob now lol
>
> this is pushing to go back to enterprise routers never a
> prob like this
>
>
>
> Base Station Information
>
> Runtime code version: V1.11.017
> Boot code version: V1.02
> LAN MAC address: 00-50-F2-C3-BB-6A
> MAC address: 00-0C-6E-6E-F9-1B
> Serial number: A238049974
>
> 2004/01/17 19:52:26 (IP Address has been removed for
> security reasons)login successful
> 2004/01/17 19:53:19 PPPoE stop PPP
> 2004/01/17 19:53:19 PPPoE stop
> 2004/01/17 19:53:21 PPPoE send PADI
> 2004/01/17 19:53:21 PPPoE receive PADO
> 2004/01/17 19:53:21 PPPoE send PADR
> 2004/01/17 19:53:21 PPPoE receive PADS
> 2004/01/17 19:53:21 PPPoE start PPP
> 2004/01/17 19:53:24 Username and Password : OK
> 2004/01/17 19:53:29 PPPoE get IP : (IP Address has been
> removed for security reasons)
>
>
>
>
> >-----Original Message-----
> >what firmware is in the 500? Have you applied the latest
> available
> >upgrade? Can you define "alot" and can you post a copy
> of the log file
> >from the mn500?
> >
> >On Sat, 17 Jan 2004 00:02:01 -0800, "Angelo"
> ><(E-Mail Removed)> wrote:
> >
> >>is there a flaw in the firmware and ppoe now? the
> router
> >>resets alot on its own
> >
> >--
> >Barb Bowman
> >Expert Zone Columnist
> >http://www.microsoft.com/windowsxp/expertzone
> >MS-MVP (Windows)
> >.
> >

yes i have, it seems to reboot itself.... i have a
giganic (intel's one that can do 1gbps up and down
hooked up to it) i don't think its the giganic because it
wasn't giving me probs with the router before though when
i upgraded this firmware it gave me problems
>-----Original Message-----
>Have you powered the unit off for a minute or so and
then restarted it? If
>not, try that.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
><(E-Mail Removed)> wrote in message
>news:01d501c3dd60$cabc1ab0$(E-Mail Removed)...
>> it works perfectly before the firmware upgrade for this
>> problem... had others taht are now fixed but i have
this
>> prob now lol
>>
>> this is pushing to go back to enterprise routers never
a
>> prob like this
>>
>>
>>
>> Base Station Information
>>
>> Runtime code version: V1.11.017
>> Boot code version: V1.02
>> LAN MAC address: 00-50-F2-C3-BB-6A
>> MAC address: 00-0C-6E-6E-F9-1B
>> Serial number: A238049974
>>
>> 2004/01/17 19:52:26 (IP Address has been removed for
>> security reasons)login successful
>> 2004/01/17 19:53:19 PPPoE stop PPP
>> 2004/01/17 19:53:19 PPPoE stop
>> 2004/01/17 19:53:21 PPPoE send PADI
>> 2004/01/17 19:53:21 PPPoE receive PADO
>> 2004/01/17 19:53:21 PPPoE send PADR
>> 2004/01/17 19:53:21 PPPoE receive PADS
>> 2004/01/17 19:53:21 PPPoE start PPP
>> 2004/01/17 19:53:24 Username and Password : OK
>> 2004/01/17 19:53:29 PPPoE get IP : (IP Address has been
>> removed for security reasons)
>>
>>
>>
>>
>> >-----Original Message-----
>> >what firmware is in the 500? Have you applied the
latest
>> available
>> >upgrade? Can you define "alot" and can you post a copy
>> of the log file
>> >from the mn500?
>> >
>> >On Sat, 17 Jan 2004 00:02:01 -0800, "Angelo"
>> ><(E-Mail Removed)> wrote:
>> >
>> >>is there a flaw in the firmware and ppoe now? the
>> router
>> >>resets alot on its own
>> >
>> >--
>> >Barb Bowman
>> >Expert Zone Columnist
>> >http://www.microsoft.com/windowsxp/expertzone
>> >MS-MVP (Windows)
>> >.
>> >
>
>
>.
>

any1
>-----Original Message-----
>yes i have, it seems to reboot itself.... i have a
>giganic (intel's one that can do 1gbps up and down
>hooked up to it) i don't think its the giganic because
it
>wasn't giving me probs with the router before though
when
>i upgraded this firmware it gave me problems
>>-----Original Message-----
>>Have you powered the unit off for a minute or so and
>then restarted it? If
>>not, try that.
>>--
>>Chris H.
>>Microsoft Windows MVP
>>Associate Expert
>>Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>><(E-Mail Removed)> wrote in message
>>news:01d501c3dd60$cabc1ab0$(E-Mail Removed)...
>>> it works perfectly before the firmware upgrade for
this
>>> problem... had others taht are now fixed but i have
>this
>>> prob now lol
>>>
>>> this is pushing to go back to enterprise routers
never
>a
>>> prob like this
>>>
>>>
>>>
>>> Base Station Information
>>>
>>> Runtime code version: V1.11.017
>>> Boot code version: V1.02
>>> LAN MAC address: 00-50-F2-C3-BB-6A
>>> MAC address: 00-0C-6E-6E-F9-1B
>>> Serial number: A238049974
>>>
>>> 2004/01/17 19:52:26 (IP Address has been removed for
>>> security reasons)login successful
>>> 2004/01/17 19:53:19 PPPoE stop PPP
>>> 2004/01/17 19:53:19 PPPoE stop
>>> 2004/01/17 19:53:21 PPPoE send PADI
>>> 2004/01/17 19:53:21 PPPoE receive PADO
>>> 2004/01/17 19:53:21 PPPoE send PADR
>>> 2004/01/17 19:53:21 PPPoE receive PADS
>>> 2004/01/17 19:53:21 PPPoE start PPP
>>> 2004/01/17 19:53:24 Username and Password : OK
>>> 2004/01/17 19:53:29 PPPoE get IP : (IP Address has
been
>>> removed for security reasons)
>>>
>>>
>>>
>>>
>>> >-----Original Message-----
>>> >what firmware is in the 500? Have you applied the
>latest
>>> available
>>> >upgrade? Can you define "alot" and can you post a
copy
>>> of the log file
>>> >from the mn500?
>>> >
>>> >On Sat, 17 Jan 2004 00:02:01 -0800, "Angelo"
>>> ><(E-Mail Removed)> wrote:
>>> >
>>> >>is there a flaw in the firmware and ppoe now? the
>>> router
>>> >>resets alot on its own
>>> >
>>> >--
>>> >Barb Bowman
>>> >Expert Zone Columnist
>>> >http://www.microsoft.com/windowsxp/expertzone
>>> >MS-MVP (Windows)
>>> >.
>>> >
>>
>>
>>.
>>
>.
>