MN-500 connection problem with no broadcasting network

Hi everybody,

I am experiencing problems to connect an MN-500 adapter
to a network without broadcasting.

The access point is a Linksys with no broadcasting
setting, I have set the SSID to the network name
following the instruction of the manual but the adapter
never recognizes the network.

If broadcast is enable, the adapter works fine but when
disable it never connects.

Does somebody know some specific configuration or what to
do to solve the problem?

Thanks in advance for your help.

The latest firmware for the MN500 requires SSID
broadcasts to be on (known issue)
>-----Original Message-----
>Hi everybody,
>
>I am experiencing problems to connect an MN-500 adapter
>to a network without broadcasting.
>
>The access point is a Linksys with no broadcasting
>setting, I have set the SSID to the network name
>following the instruction of the manual but the adapter
>never recognizes the network.
>
>If broadcast is enable, the adapter works fine but when
>disable it never connects.
>
>Does somebody know some specific configuration or what
to
>do to solve the problem?
>
>Thanks in advance for your help.
>.
>