MN-500 as client

I would like to know that i can set a MN-500 as client of
another access point, like a Lucent AP2000 or a Samsung
SWL300?
Thanks

Broadband modem --> WAN port of MN-500 #1
MN-500 #1 LAN port #2 --> WAN port of MN-500 #2
MN-500 #1 LAN port #3 --> WAN port of MN-500 #3 (if available)

Make sure all MN-500s are running the latest firmware 1.11.017

Now lets look at the setup of each MN-500:

MN-500 #1
router mode
LAN IP address at default of 192.168.2.1
some SSID
some WEP key
channel 6

MN-500 #2
bridge mode
LAN IP address at 192.168.2.42, outside of default DHCP range
same SSID
same WEP key
channel 1

MN-500 #3 (if available)
bridge mode
LAN IP address at 192.168.2.43, outside of default DHCP range
same SSID
same WEP key
channel 11


If you keep the SSID and WEP key the same for all base stations, people
will be able to move between offices and get a connection.

You need to select non-overlapping channels for the base stations to
prevent interference.

Channels 1, 6, and 11 are the three non-overlapping channels.

There are more combinations if you only need two channels.

Lucas Oliveira wrote:

> I would like to know that i can set a MN-500 as client of
> another access point, like a Lucent AP2000 or a Samsung
> SWL300?
> Thanks