Missing TCP/IP Protocol-Install USB to Ethernet Adapter

Hello,

I am trying to install/use a Siemens Speedstream USB 10/100 Ethernet Adapter
on a Gateway SOLO 9300 CX running Windows 98SE.

During the install a file was declared missing from C: drive (sorry went so
fast I missed the file name), yet driver from CD was installed ok and shows
up in list of network adapters under Device Manager.

Called local cable company to debug my problem and they conclude after
running winipcfg that the TCP/IP protocol for the adapter is missing. The
adapter does not show in the pull down.

When I go to windows control panel/network to ADD protocol, nothing happens.

I am stuck and not sure where to turn. I tried Gateway support with no
progress and have not been able to contact Siemens which is my next step.

Peace,
GR

Have you tried restarting the computer from cold and then trying to add the
TCP/IP protocol?

"gramsay" <(E-Mail Removed)> wrote in message
news:37545464-D018-45D5-9045-(E-Mail Removed)...
> Hello,
>
> I am trying to install/use a Siemens Speedstream USB 10/100 Ethernet
Adapter
> on a Gateway SOLO 9300 CX running Windows 98SE.
>
> During the install a file was declared missing from C: drive (sorry went
so
> fast I missed the file name), yet driver from CD was installed ok and
shows
> up in list of network adapters under Device Manager.
>
> Called local cable company to debug my problem and they conclude after
> running winipcfg that the TCP/IP protocol for the adapter is missing. The
> adapter does not show in the pull down.
>
> When I go to windows control panel/network to ADD protocol, nothing
happens.
>
> I am stuck and not sure where to turn. I tried Gateway support with no
> progress and have not been able to contact Siemens which is my next step.
>
> Peace,
> GR

Yes .... still wont work.

"Alan" wrote:

> Have you tried restarting the computer from cold and then trying to add the
> TCP/IP protocol?
>
> "gramsay" <(E-Mail Removed)> wrote in message
> news:37545464-D018-45D5-9045-(E-Mail Removed)...
> > Hello,
> >
> > I am trying to install/use a Siemens Speedstream USB 10/100 Ethernet
> Adapter
> > on a Gateway SOLO 9300 CX running Windows 98SE.
> >
> > During the install a file was declared missing from C: drive (sorry went
> so
> > fast I missed the file name), yet driver from CD was installed ok and
> shows
> > up in list of network adapters under Device Manager.
> >
> > Called local cable company to debug my problem and they conclude after
> > running winipcfg that the TCP/IP protocol for the adapter is missing. The
> > adapter does not show in the pull down.
> >
> > When I go to windows control panel/network to ADD protocol, nothing
> happens.
> >
> > I am stuck and not sure where to turn. I tried Gateway support with no
> > progress and have not been able to contact Siemens which is my next step.
> >
> > Peace,
> > GR
>
>
>