Migrating multiple IPs to replacement network card

Hello,

I have a Windows 2000 server that has approx 50 IPs bound to it. I've had a
hardware failure with the network card and I need to replace it. However, I
don't want to reset up all the IPs on the new card. Is anybody aware of a
procedure that will migrate all of the IPs to the new network card?


Thanks.

Hmm..I haven't had to try this but I thought I read that this way would
work. You have to do this while the old Nic is still there.

1. Go to the properties of the Nic and select that you want to Update the
Driver.
2. Use the Microsoft Loop Back Adapter driver.
3. Remove the old nic and install the new Nic and cancel any "plug and play"
stuff that comes up.
4. Repeat the "Update Driver" on the MS Loopback adapter and use the Driver
for the New Nic.

What this is doing is making the MS Loopback Adapter act as a "place holder"
for the TCP/IP Setup during the transition.

If there is a better way, maybe someone else will suggest it.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/IS...cessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/t...dance/2004.asp
http://www.microsoft.com/isaserver/t...dance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



"Jay Douglas" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hello,
>
> I have a Windows 2000 server that has approx 50 IPs bound to it. I've had
a
> hardware failure with the network card and I need to replace it. However,
I
> don't want to reset up all the IPs on the new card. Is anybody aware of a
> procedure that will migrate all of the IPs to the new network card?
>
>
> Thanks.
>
>

Very interesting approach, I'll give it a try.

I wonder what the solution would be if I was migrating all of these IPs to
another machine ..?

"Phillip Windell" <@.> wrote in message
news:(E-Mail Removed)...
> Hmm..I haven't had to try this but I thought I read that this way would
> work. You have to do this while the old Nic is still there.
>
> 1. Go to the properties of the Nic and select that you want to Update the
> Driver.
> 2. Use the Microsoft Loop Back Adapter driver.
> 3. Remove the old nic and install the new Nic and cancel any "plug and
> play"
> stuff that comes up.
> 4. Repeat the "Update Driver" on the MS Loopback adapter and use the
> Driver
> for the New Nic.
>
> What this is doing is making the MS Loopback Adapter act as a "place
> holder"
> for the TCP/IP Setup during the transition.
>
> If there is a better way, maybe someone else will suggest it.
>
> --
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
> -----------------------------------------------------
> Understanding the ISA 2004 Access Rule Processing
> http://www.isaserver.org/articles/IS...cessRules.html
>
> Microsoft Internet Security & Acceleration Server: Guidance
> http://www.microsoft.com/isaserver/t...dance/2004.asp
> http://www.microsoft.com/isaserver/t...dance/2000.asp
>
> Microsoft Internet Security & Acceleration Server: Partners
> http://www.microsoft.com/isaserver/partners/default.asp
> -----------------------------------------------------
>
>
>
> "Jay Douglas" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hello,
>>
>> I have a Windows 2000 server that has approx 50 IPs bound to it. I've
>> had
> a
>> hardware failure with the network card and I need to replace it.
>> However,
> I
>> don't want to reset up all the IPs on the new card. Is anybody aware of
>> a
>> procedure that will migrate all of the IPs to the new network card?
>>
>>
>> Thanks.
>>
>>
>
>

The method was originally in the context of moving an OS, intact, from one
hardware to new hardware (or similar type).

But if you were just replacing the whole machine, OS and everything,...then
find someone who can type fast,...offer to buy them lunch.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/IS...cessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/t...dance/2004.asp
http://www.microsoft.com/isaserver/t...dance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------


"Jay Douglas" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Very interesting approach, I'll give it a try.
>
> I wonder what the solution would be if I was migrating all of these IPs to
> another machine ..?
>
> "Phillip Windell" <@.> wrote in message
> news:(E-Mail Removed)...
> > Hmm..I haven't had to try this but I thought I read that this way would
> > work. You have to do this while the old Nic is still there.
> >
> > 1. Go to the properties of the Nic and select that you want to Update
the
> > Driver.
> > 2. Use the Microsoft Loop Back Adapter driver.
> > 3. Remove the old nic and install the new Nic and cancel any "plug and
> > play"
> > stuff that comes up.
> > 4. Repeat the "Update Driver" on the MS Loopback adapter and use the
> > Driver
> > for the New Nic.
> >
> > What this is doing is making the MS Loopback Adapter act as a "place
> > holder"
> > for the TCP/IP Setup during the transition.
> >
> > If there is a better way, maybe someone else will suggest it.
> >
> > --
> > Phillip Windell [MCP, MVP, CCNA]
> > www.wandtv.com
> > -----------------------------------------------------
> > Understanding the ISA 2004 Access Rule Processing
> > http://www.isaserver.org/articles/IS...cessRules.html
> >
> > Microsoft Internet Security & Acceleration Server: Guidance
> > http://www.microsoft.com/isaserver/t...dance/2004.asp
> > http://www.microsoft.com/isaserver/t...dance/2000.asp
> >
> > Microsoft Internet Security & Acceleration Server: Partners
> > http://www.microsoft.com/isaserver/partners/default.asp
> > -----------------------------------------------------
> >
> >
> >
> > "Jay Douglas" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> >> Hello,
> >>
> >> I have a Windows 2000 server that has approx 50 IPs bound to it. I've
> >> had
> > a
> >> hardware failure with the network card and I need to replace it.
> >> However,
> > I
> >> don't want to reset up all the IPs on the new card. Is anybody aware
of
> >> a
> >> procedure that will migrate all of the IPs to the new network card?
> >>
> >>
> >> Thanks.
> >>
> >>
> >
> >
>
>

Can you say "temp agency"?

=)

Thx for your time....

"Phillip Windell" <@.> wrote in message
news:(E-Mail Removed)...
> The method was originally in the context of moving an OS, intact, from one
> hardware to new hardware (or similar type).
>
> But if you were just replacing the whole machine, OS and
> everything,...then
> find someone who can type fast,...offer to buy them lunch.
>
> --
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
> -----------------------------------------------------
> Understanding the ISA 2004 Access Rule Processing
> http://www.isaserver.org/articles/IS...cessRules.html
>
> Microsoft Internet Security & Acceleration Server: Guidance
> http://www.microsoft.com/isaserver/t...dance/2004.asp
> http://www.microsoft.com/isaserver/t...dance/2000.asp
>
> Microsoft Internet Security & Acceleration Server: Partners
> http://www.microsoft.com/isaserver/partners/default.asp
> -----------------------------------------------------
>
>
> "Jay Douglas" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Very interesting approach, I'll give it a try.
>>
>> I wonder what the solution would be if I was migrating all of these IPs
>> to
>> another machine ..?
>>
>> "Phillip Windell" <@.> wrote in message
>> news:(E-Mail Removed)...
>> > Hmm..I haven't had to try this but I thought I read that this way would
>> > work. You have to do this while the old Nic is still there.
>> >
>> > 1. Go to the properties of the Nic and select that you want to Update
> the
>> > Driver.
>> > 2. Use the Microsoft Loop Back Adapter driver.
>> > 3. Remove the old nic and install the new Nic and cancel any "plug and
>> > play"
>> > stuff that comes up.
>> > 4. Repeat the "Update Driver" on the MS Loopback adapter and use the
>> > Driver
>> > for the New Nic.
>> >
>> > What this is doing is making the MS Loopback Adapter act as a "place
>> > holder"
>> > for the TCP/IP Setup during the transition.
>> >
>> > If there is a better way, maybe someone else will suggest it.
>> >
>> > --
>> > Phillip Windell [MCP, MVP, CCNA]
>> > www.wandtv.com
>> > -----------------------------------------------------
>> > Understanding the ISA 2004 Access Rule Processing
>> > http://www.isaserver.org/articles/IS...cessRules.html
>> >
>> > Microsoft Internet Security & Acceleration Server: Guidance
>> > http://www.microsoft.com/isaserver/t...dance/2004.asp
>> > http://www.microsoft.com/isaserver/t...dance/2000.asp
>> >
>> > Microsoft Internet Security & Acceleration Server: Partners
>> > http://www.microsoft.com/isaserver/partners/default.asp
>> > -----------------------------------------------------
>> >
>> >
>> >
>> > "Jay Douglas" <(E-Mail Removed)> wrote in message
>> > news:(E-Mail Removed)...
>> >> Hello,
>> >>
>> >> I have a Windows 2000 server that has approx 50 IPs bound to it. I've
>> >> had
>> > a
>> >> hardware failure with the network card and I need to replace it.
>> >> However,
>> > I
>> >> don't want to reset up all the IPs on the new card. Is anybody aware
> of
>> >> a
>> >> procedure that will migrate all of the IPs to the new network card?
>> >>
>> >>
>> >> Thanks.
>> >>
>> >>
>> >
>> >
>>
>>
>
>

Drill down the registry to
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters\Interfaces\{GUID}
and export/copy data you need such as IPAddress, SubnetMask etc.