Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > merging 2 LANs to Internet

Reply
Thread Tools Display Modes

merging 2 LANs to Internet

 
 
Kaitlyn Luna
Guest
Posts: n/a

 
      10-19-2006, 02:16 PM
I have a wired router I have been using a little over 5 years now. My
computers are at 192.168.100.0/24 using static IPs with the router itself
at .254. My DSL service uses PPPoE.

I want to get a Nintendo DS, and that will force me to put wireless into
the mix. I can't use Nintendo's own USB adapter because it is for XP only
while I intend to remain with 2000 + Linux and FreeBSD. But if I could
use it, it supports Bluetooth-style pairing with your DS. I have also
been told a USB wireless NIC costs almost as much as a router, yet
suffers from low power and greater susceptibility to interference.

I'm still rather wary of wireless, so I want to treat the wireless as
more or less an untrusted network, as isolated as practicable from my
existing LAN. My DSL provider won't let me have a second IP from them, or
I would separate them that way. Objective 1: Existing PCs and the DS can
reach the Internet. Objective 2: Anything hitting the wireless (including
the DS itself) can't reach the PC's.

So here's my plan. I have tentatively picked the Buffalo WHR-HP-G54 for a
wireless router. I'll connect its WAN port to one of my wired router's
ports. I will then configure the wireless router's WAN to a static IP of
192.168.100.37/24 with a gateway of 192.168.100.254. If necessary, I'll
make .37 the wired router's DMZ IP. The DS allows for static IPs, so I
will disable the Buffalo's DHCP server and let the DS become
192.168.37.37/24 using 192.168.100.37 as its gateway. (Those 37's were
specially chosen. That's "DS" on a telephone.) The DS supports "b" only
(no "g"), and supports WEP only (no WPA, and they recommend 64-bit for
WEP). The DS does support MAC filtering and SSID broadcast disabled.

Is the above plan sufficient to meet the stated objectives?
 
Reply With Quote
 
 
 
 
John Navas
Guest
Posts: n/a

 
      10-19-2006, 06:40 PM
On Thu, 19 Oct 2006 14:16:01 GMT, Kaitlyn Luna <Kaitlyn@127.0.0.1> wrote
in <Xns98616879BD8A8KaityL@216.77.188.18>:

>I have a wired router I have been using a little over 5 years now. My
>computers are at 192.168.100.0/24 using static IPs with the router itself
>at .254. My DSL service uses PPPoE.
>
>I want to get a Nintendo DS, and that will force me to put wireless into
>the mix. I can't use Nintendo's own USB adapter because it is for XP only
>while I intend to remain with 2000 + Linux and FreeBSD. But if I could
>use it, it supports Bluetooth-style pairing with your DS. I have also
>been told a USB wireless NIC costs almost as much as a router, yet
>suffers from low power and greater susceptibility to interference.
>
>I'm still rather wary of wireless, so I want to treat the wireless as
>more or less an untrusted network, as isolated as practicable from my
>existing LAN. My DSL provider won't let me have a second IP from them, or
>I would separate them that way. Objective 1: Existing PCs and the DS can
>reach the Internet. Objective 2: Anything hitting the wireless (including
>the DS itself) can't reach the PC's.
>
>So here's my plan. I have tentatively picked the Buffalo WHR-HP-G54 for a
>wireless router. I'll connect its WAN port to one of my wired router's
>ports. I will then configure the wireless router's WAN to a static IP of
>192.168.100.37/24 with a gateway of 192.168.100.254. If necessary, I'll
>make .37 the wired router's DMZ IP. The DS allows for static IPs, so I
>will disable the Buffalo's DHCP server and let the DS become
>192.168.37.37/24 using 192.168.100.37 as its gateway. (Those 37's were
>specially chosen. That's "DS" on a telephone.) The DS supports "b" only
>(no "g"), and supports WEP only (no WPA, and they recommend 64-bit for
>WEP). The DS does support MAC filtering and SSID broadcast disabled.
>
>Is the above plan sufficient to meet the stated objectives?


You want a wireless access point, not a wireless router, or a wireless
router configured as a wireless access point -- see How To wiki below.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>
 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Merging results from different domain name servers David Brown Linux Networking 4 07-24-2009 01:03 PM
linking 2 LANS over the internet, possible? gordonquinn Wireless Internet 3 09-10-2007 01:56 AM
Merging two seperate networks HELP! Greg Eshleman Windows Networking 6 08-25-2006 10:50 PM
Two remote LANs sharing internet thru wireless connection tns1 Wireless Internet 16 05-08-2005 05:23 PM
Moving and merging DHCP server Bill Bradley Windows Networking 1 03-15-2005 02:08 PM



1 2 3 4 5 6 7 8 9 10 11