Measure Throughput Between Subnets

I have 2 subnets, 192.168.0.x and 192.168.1.x connected via ADSL routers
over a leased line. Recently, things have been rather slow so I'd like to
know how I can determine how much traffic is going between the 2 routers?
Tracert shows times of between 5 and 10 ms.

You're talking two different things here. If you want to monitor the amount
of traffic crossing interfaces, look at something like MRTG/PRTG or login
and look at the interface utilization on the routers. Tracert show you the
latency between two machines. The only time latency is affected by
utilization is when utilization is very close or at 100% for a sustained
period.

"Andrew Hayes" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have 2 subnets, 192.168.0.x and 192.168.1.x connected via ADSL routers
> over a leased line. Recently, things have been rather slow so I'd like to
> know how I can determine how much traffic is going between the 2 routers?
> Tracert shows times of between 5 and 10 ms.
>
>