Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > masquerading and Edimax Ew-7205APL AP

Reply
Thread Tools Display Modes

masquerading and Edimax Ew-7205APL AP

 
 
wayne
Guest
Posts: n/a

 
      07-18-2003, 04:29 PM
I have two laptops thinkpad and dell latitude running knoppix 3.2.
These work just fine with a borrowed orinoco 802.11b 11MBs card with
the access point of a local internet cafe.
And they work just fine behind a RH 8.0 iptables monmotha firewall to
do the 196.168.1.x /24 maqueraded connection to the Internet via
ethernet on the motherboards.
And they connect just fine by radio to the EDIMAX Ew-7205APL Wireless
Acccess Point.
Can connect to the management of the AP with
http://192.168.2.1(default) and
change the AP IP config (netmask is fixed tho at 24 bits) if I want.
And also enable the DHCP server.
Cannot connect to the Internet via wireless cos there is no connection
between 192.168.2.x and 192.168.1.x.
Is the solution to extend the the /24 maquerade to /22 and have
192.168.1.x and 192.168.2.x range masqueraded on the firewall?
Maybe I should forget the idea of keeping the clients ethernet access
to the Internet, just use the wireless?

TIA

wayne
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Edimax EW-7722UTn Bob Tennent Linux Networking 5 06-09-2011 03:23 AM
Edimax problem: no ACK eXziBit Wireless Internet 0 01-30-2008 03:40 PM
compusa/edimax WDS mode yosi.keller@gmail.com Wireless Internet 1 05-04-2006 03:39 AM
My troubles with EDIMAX... Michel Firholz Network Routers 0 01-06-2006 05:43 PM
Edimax WAP Oveheating?? ( EW-7203APg) ad Wireless Internet 0 07-26-2005 11:45 PM



1 2 3 4 5 6 7 8 9 10 11