Mapped Drives not accessible out of standby

When coming out of standby the networked drives and printers are
inaccessbile, the only way to access them is to reboot. Any thoughts?

Hi
Make sure that the Network Card is not set to Power Save. (usually an entry
in the Card's properties). http://www.ezlan.net/example/powersave.jpg
Look at Windows (or any other propriety) Standby settings and get any
Network's component out of the Power Saving/Standby scheme.
Jack (MVP-Networking).

"Chris" <(E-Mail Removed)> wrote in message
news:0609A0F6-13B6-4E30-BAB5-(E-Mail Removed)...
> When coming out of standby the networked drives and printers are
> inaccessbile, the only way to access them is to reboot. Any thoughts?

Power settings on adapter are disabled, and I saw nothing in the Standby
settings involving networking (I'm only using Windows for power schemes and
standby). Am I missing something else? Does it make a difference that it's
over wireless? Seems like such an inconvenience I can't imagine it's supposed
to behave like this.

Thank you for your help!

"Jack (MVP-Networking)." wrote:

> Hi
> Make sure that the Network Card is not set to Power Save. (usually an entry
> in the Card's properties). http://www.ezlan.net/example/powersave.jpg
> Look at Windows (or any other propriety) Standby settings and get any
> Network's component out of the Power Saving/Standby scheme.
> Jack (MVP-Networking).
>
> "Chris" <(E-Mail Removed)> wrote in message
> news:0609A0F6-13B6-4E30-BAB5-(E-Mail Removed)...
> > When coming out of standby the networked drives and printers are
> > inaccessbile, the only way to access them is to reboot. Any thoughts?
>
>
>