Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > How many devices can I use with a Homeplug?

Reply
Thread Tools Display Modes

How many devices can I use with a Homeplug?

 
 
Zach
Guest
Posts: n/a

 
      07-07-2008, 04:27 PM
Hello

I need to set up a network around the house. The problem is that I
have two ethernet exits on my modem (one for tv and one for internet)
that I need to get to the other side of the house (where the actual tv
and computer are).

Can I plug both cables into two different home plugs and then use 2
others to pick them up on the other side of the house? Or will that
not be possible because only one type of device can be pluged into a
home plug network at a time?

Thanks

Zach
 
Reply With Quote
 
 
 
 
Chris
Guest
Posts: n/a

 
      07-08-2008, 06:06 PM

"Zach" <(E-Mail Removed)> wrote in message
news:27918855-4418-409a-ac6a-(E-Mail Removed)...
> Hello
>
> I need to set up a network around the house. The problem is that I
> have two ethernet exits on my modem (one for tv and one for internet)
> that I need to get to the other side of the house (where the actual tv
> and computer are).
>
> Can I plug both cables into two different home plugs and then use 2
> others to pick them up on the other side of the house? Or will that
> not be possible because only one type of device can be pluged into a
> home plug network at a time?
>
> Thanks
>
> Zach

You only need one homeplug plugged into your modem/router. That is why you
are getting conflict.
Chris



 
Reply With Quote
 
Peter Pan
Guest
Posts: n/a

 
      07-09-2008, 04:22 AM
Zach wrote:
> Hello
>
> I need to set up a network around the house. The problem is that I
> have two ethernet exits on my modem (one for tv and one for internet)
> that I need to get to the other side of the house (where the actual tv
> and computer are).
>
> Can I plug both cables into two different home plugs and then use 2
> others to pick them up on the other side of the house? Or will that
> not be possible because only one type of device can be pluged into a
> home plug network at a time?
>
> Thanks
>
> Zach


huh? why is your tv using ethernet?
you didn't mention your provider, or whether you have voip, but most cable
modems have coax in and one ethernet out and a usb out, or depending on if
it is a voip modem and not just cable internet, one ethernet out and one
phone jack out.... never seen or heard of two ethernet outs.....


 
Reply With Quote
 
ps56k
Guest
Posts: n/a

 
      07-09-2008, 05:18 PM
Zach wrote:
> Hello
>
> I need to set up a network around the house. The problem is that I
> have two ethernet exits on my modem (one for tv and one for internet)
> that I need to get to the other side of the house (where the actual tv
> and computer are).
>


what is your provider - ala ATT U-verse ?
and the make & model number of your "modem"

> Can I plug both cables into two different home plugs and then use 2
> others to pick them up on the other side of the house? Or will that
> not be possible because only one type of device can be pluged into a
> home plug network at a time?


Since we haven't seen this type of hardware mentioned before,
it might be a little new for all of us to help with...

You might try the forums over here - if you have the ATT service
http://www.dslreports.com/forums/all

lastly - on the AC wiring solution,
which model "homeplugs" are you using ?
Without knowing what your "modem" is doing with each Ethernet connection,
it's hard to guess what's going on with the AC modules.

What IP address's are used for the TV and for the Internet segments ?
Are they on the same IP segment or ??


 
Reply With Quote
 
ps56k
Guest
Posts: n/a

 
      07-09-2008, 06:26 PM
Peter Pan wrote:
> Zach wrote:
>> Hello
>>
>> I need to set up a network around the house. The problem is that I
>> have two ethernet exits on my modem (one for tv and one for internet)
>> that I need to get to the other side of the house (where the actual
>> tv and computer are).
>>
>> Can I plug both cables into two different home plugs and then use 2
>> others to pick them up on the other side of the house? Or will that
>> not be possible because only one type of device can be pluged into a
>> home plug network at a time?
>>
>> Thanks
>>
>> Zach

>
> huh? why is your tv using ethernet?


yeah - me too - after I thought about this network....

why does your "modem" have two Ethernet jacks -
with one designed for TV ???

And exactly how does the TV receive the Ethernet signal ???
Is there some specially supplied TV converter box
to go from the Ethernet to the RF signal or RCA connectors or HDMI ??

Haven't really seen a TV with an Ethernet input...

Please give more specifics and details...


 
Reply With Quote
 
Bob Smith
Guest
Posts: n/a

 
      07-10-2008, 01:12 AM
Hi Zach,

I've got one homeplug adapter from the modem to the AC power.

Then use the 'receiver/transmitters' plugged into the AC plugs in the
house. I've installed up to 6 homeplug Recevier/transmitters' in one
home that was multi-level and had not problems. I've set each of them
up on a fixed IP and given each one of them a different SSID just so
the people could tell which one they were connected to. I tried WDS
and was having no luck with it so I stuck with different SSID's on
each unit.
With the Fixed Ip's I had no problem when the power failed from PGE
because I didn't have to depend on the netgear router giving out DHCP
ip's. Also At the router I had an HP AIO 7410 printer that everyone
could connect to and print.

The only problem I can see with the homeplug setup is that you are
limited to about 6mb/sec transfer rate. This is ok for everythilng
except transfering files from the internet to the PC or from PC to PC.
It's NOT network speed that you would see on a wired network.

Hope this helps,


Bob Smith
Robert Smith Consulting
ARS NA6T


On Mon, 7 Jul 2008 09:27:56 -0700 (PDT), Zach <(E-Mail Removed)>
wrote:

>Hello
>
>I need to set up a network around the house. The problem is that I
>have two ethernet exits on my modem (one for tv and one for internet)
>that I need to get to the other side of the house (where the actual tv
>and computer are).
>
>Can I plug both cables into two different home plugs and then use 2
>others to pick them up on the other side of the house? Or will that
>not be possible because only one type of device can be pluged into a
>home plug network at a time?
>
>Thanks
>
>Zach

 
Reply With Quote
 
TBerk
Guest
Posts: n/a

 
      07-10-2008, 08:26 AM


I see some others have asked good questions to try and help you get a
solution but here is my horse of another color:

Why is the modem on one side of the house and the TV and computer on
the other side, with a need to get a connection 'over to them', so to
speak.

Why not relocate the modem over to the TV and Computer?


TBerk

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Homeplug Occam Broadband 13 07-23-2008 09:09 PM
HomePlug hzatph Home Networking 4 04-07-2008 09:19 PM
homeplug Stephen Hammond Home Networking 1 03-25-2008 10:02 PM
Homeplug problems Sean Inglis Broadband 8 02-10-2008 01:22 PM
Homeplug technology Timo Jeranko Wireless Internet 2 11-02-2006 08:09 PM



1 2 3 4 5 6 7 8 9 10 11