Manual or Auto channel setting?

I have a Netgear WNR854T using with a MAC on 'n' with a steady 144mb
connection.

Currently it is setup to auto select a channel. I've notice three other
Wlans that I can detect (secured ones).

Is there any benefit of manually selecting a channel, or best to leave
it on automatic. I also have a Digisender for my SKY box, but if I turn
this on it kills my wlan.

Thanks

Clive

On Wed, 11 Apr 2007 18:45:12 GMT, Clive <(E-Mail Removed)> wrote in
<Y0aTh.184$(E-Mail Removed)>:

>I have a Netgear WNR854T using with a MAC on 'n' with a steady 144mb
>connection.
>
>Currently it is setup to auto select a channel. I've notice three other
>Wlans that I can detect (secured ones).
>
>Is there any benefit of manually selecting a channel, or best to leave
>it on automatic. I also have a Digisender for my SKY box, but if I turn
>this on it kills my wlan.

I've found it best to put it on manual, and carefully test 1, 6, and 11
for the best results -- auto is all too often wrong.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>

I'm not sure if that particular router changes the channels often or just
once, but I would heartily recommend manually selecting the best channel in
your area. After experimenting, I found that it is best to use channel 1, 6
or 11, whichever is less occupied. If all 3 are taken, the next best choice
is the one with the weakest neighboring signal. The vast majority of my
neighbors use channel 9 which interferes with both channel 6 & 11, so I
chose channel 1.


Bill Radio
Click for Wireless Reviews at:
http://www.mountainwireless.com


"Clive" <(E-Mail Removed)> wrote in message
news:Y0aTh.184$(E-Mail Removed).. .
>I have a Netgear WNR854T using with a MAC on 'n' with a steady 144mb
>connection.
>
> Currently it is setup to auto select a channel. I've notice three other
> Wlans that I can detect (secured ones).
>
> Is there any benefit of manually selecting a channel, or best to leave it
> on automatic. I also have a Digisender for my SKY box, but if I turn this
> on it kills my wlan.
>
> Thanks
>
> Clive



--
Posted via a free Usenet account from http://www.teranews.com