Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Mac Driver Installer asks for diskette...

Reply
Thread Tools Display Modes

Mac Driver Installer asks for diskette...

 
 
DaveC
Guest
Posts: n/a

 
      05-14-2004, 06:52 AM
I've downloaded the drivers for a Lucent WaveLAN Silver 802.11b PC card. I'm
trying to install it on a PowerBook 5300, with little success.

Every time I launch the installer, it says "Please insert the diskette
"WaveLan® Install Disk".

The install instructions say to create a folder on the HD called "WaveLAN"
and place the installer files in there. I've done that.

I also named the diskette exactly "WaveLAN® Install Disk". No joy. The
installer says "This is not the correct install disk. Please be sure you're
using the original installation disk." Original? Pffff.

Anyone come up against such brain-dead install scripts before? Is there any
way I can work around this?

I tried putting all the bits wherever I thought they should go in the System
Folder, but apparently I didn't get it right, so I undid that little
experiment.

PowerBook 5300; Mac OS 8.5.

Thanks,
--
DaveC
(E-Mail Removed)
This is an invalid return address
Please reply in the news group

 
Reply With Quote
 
 
 
 
Michael Vilain
Guest
Posts: n/a

 
      05-14-2004, 08:32 AM
In article <(E-Mail Removed) et>,
DaveC <(E-Mail Removed)> wrote:

> I've downloaded the drivers for a Lucent WaveLAN Silver 802.11b PC card. I'm
> trying to install it on a PowerBook 5300, with little success.
>
> Every time I launch the installer, it says "Please insert the diskette
> "WaveLan® Install Disk".
>
> The install instructions say to create a folder on the HD called "WaveLAN"
> and place the installer files in there. I've done that.
>
> I also named the diskette exactly "WaveLAN® Install Disk". No joy. The
> installer says "This is not the correct install disk. Please be sure you're
> using the original installation disk." Original? Pffff.
>
> Anyone come up against such brain-dead install scripts before? Is there any
> way I can work around this?
>
> I tried putting all the bits wherever I thought they should go in the System
> Folder, but apparently I didn't get it right, so I undid that little
> experiment.
>
> PowerBook 5300; Mac OS 8.5.


The only way around such things is to create a "disk image" with the
files required. These are pretty common in MacOS X, but not used much
in 8.6 days.

Apple distributes MacOS 9 program called "Disk Copy" which is available
at http://www.versiontracker.com/dyn/moreinfo/macos/312

I think you can use that folder to create a disk image with this
program. Then mount the image and see if the installer will think a
floppy is installed.

Welcome to the wonderful world of old software...

--
DeeDee, don't press that button! DeeDee! NO! Dee...



 
Reply With Quote
 
Clark Martin
Guest
Posts: n/a

 
      05-16-2004, 06:08 PM
In article <(E-Mail Removed) et>,
DaveC <(E-Mail Removed)> wrote:

> I've downloaded the drivers for a Lucent WaveLAN Silver 802.11b PC card. I'm
> trying to install it on a PowerBook 5300, with little success.
>
> Every time I launch the installer, it says "Please insert the diskette
> "WaveLan® Install Disk".
>
> The install instructions say to create a folder on the HD called "WaveLAN"
> and place the installer files in there. I've done that.
>
> I also named the diskette exactly "WaveLAN® Install Disk". No joy. The
> installer says "This is not the correct install disk. Please be sure you're
> using the original installation disk." Original? Pffff.
>
> Anyone come up against such brain-dead install scripts before? Is there any
> way I can work around this?
>
> I tried putting all the bits wherever I thought they should go in the System
> Folder, but apparently I didn't get it right, so I undid that little
> experiment.
>
> PowerBook 5300; Mac OS 8.5.


I've got a PB5300 running OS 8.6 with an Orinoco Silver (same thing as
the WaveLAN). Off hand I can't recall what driver I put into it but
didn't have any such problem.

If the installer files originally came as disk image(s) then go back to
the disk image(s) and mount them using DiskCopy. Then run the installer
from the disk images. Some installers will run fine in a folder on the
HD but others are looking for a disk mounted on the desktop. Usually a
mounted disk image will work for these. I've only encountered a very
few installers that actually had to have a floppy mounted.

--
Clark Martin
Redwood City, CA, USA Macintosh / Internet Consulting

"I'm a designated driver on the Information Super Highway"
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vista Asks for XP Password Jim Becker Wireless Networks 3 11-27-2007 03:32 AM
Problem with Windows installer Fernando Windows Networking 0 01-09-2006 10:01 PM
newb asks - BT or plus net? k@ti Broadband 19 07-17-2004 10:45 PM
need to add network driver to installation driver diskette Gary Roach Linux Networking 0 06-02-2004 04:12 PM
Installer Interrupted Joel Broadband Hardware 0 04-09-2004 03:05 AM



1 2 3 4 5 6 7 8 9 10 11